19
Lift Canopy to ceiling aligning the key hole slots with the screws on the bottom of the Mounting bracket. Rotate the canopy Counter Clockwise to lock in place. Tighten the screws to secure the Canopy. See inset for Keyhole shape
| 20 |
|
|
|
|
|
|
|
|
|
|
|
|
| Black |
| House |
| Fan |
| Black |
| |
|
|
|
|
|
|
|
| ||||
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| Blue |
|
|
|
| White |
|
|
|
| White |
| ||
|
|
|
| Green |
|
|
| Green(downrod) |
| ||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| Green(Bracket) | |||
For pullchain controls, follow diagram above. Make sure that all exposed wiring is secured inside wire nuts. Note: Wires from house may vary in color and may not include ground wire. After wiring is complete, gently push wires into junction box with wire nuts pointing upward. Refer to point 3 of safety tips.
21
Fan Switch
Light Switch
Wall
Control
For control of fan and optional light from wall location, follow diagram above. NOTE: A profes- sional electrician is recommended for this type of installation.
22
Attach blade brackets to blades using the blade bracket screws and washers provided.
23
Check the motor for plastic shipping stabilizer tabs, and remove them if they are present. Attach blade assembly to motor using the motor screws and washers provided. Tighten screws securely.
24
After attaching blade; reinstall the switch hous- ing using the three screws previously removed.
