| 19 |
|
|
| House |
|
|
| Fan |
| Black |
| |
|
|
|
|
|
|
|
| ||||||
|
|
| Black |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| ||||
|
|
| White |
|
|
|
|
|
|
| White |
| |
|
| Green |
|
|
|
|
| Green(downrod) | |||||
|
|
|
|
|
|
|
|
| Green(Bracket) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Make wire connections as per above diagram. Connect the white wire from the fan to the White or Neutral wire from the power source. Connect the black wire from the fan to the Black or hot wire from the power source. Connect all Green / Yellow wires from the fan, Downrod and mounting bracket to the Ground wire from the house.
22
Lift Canopy to ceiling aligning the key hole slots with the screws on the bottom of the Mounting bracket. Rotate the canopy Counter Clockwise to lock in place. Tighten the screws to secure the Canopy. See inset for Keyhole shape
25
Loosen 3 screws with key slots and remove the screw without key slot.
28
Loosen 3 screws with key slots. Attach fitter by placing over screws and twisting clockwise into place. Tighten all 3 screws securely.
20
Make wire connections to power source using wire nuts provided. Make sure that no filiments are outside of the wirenut. After making the wire connections, the wires should be spread apart with the grounded conductor and the
23
Attach blade brackets to blades using the blade bracket screws and washers provided.
26
Take plate and place over the 3 screws with key slots and twist to hold in place. Replace the screw removed and tighten all 4 screws secure- ly holding the plate.
29
Install the 2 50 watt halogen bulbs. Do not touch bulb surface as oily residue from skin can cause the bulb to explode.
21
24
Remove the shipping stabilizer plate and throw away (see insert). The screws, washers and motor pads are
27
Plug white wire from fan to white wire from light kit. Then plug black from fan to black from light kit.
30
Attach glass by locating dimples in light kit and aligning it with the groves in glass and twisting clockwise till tight.
