19
Loosen 3 screws with key slots and remove the screwwithout key slot.
22
Loosen 3 screws with key slots. Attach fitter by placing over screws and twisting clockwise into place. Tighten all 3 screws securely.
25
If you choose not to use light kit. Loosen 3 screws with key slots and remove the 1 without slots. Attach switch cap holder by placing over screws and twisting clockwise into place. Replace screws removed and tighen all screws securely. Place switch cap cover over switch cap holder and tighen screw to hold in place.
28
Install wall control unit to outlet box using machine screws provided.
20
Take plate and place over the 3 screws with key slots and twist to hold in place. Replace the screw removed and tighten all 4 screws secure- ly holding the plate.
23
Install the 2 50 watt halogen bulbs. Do not touch bulb surface as oily residue from skin can cause the bulb to explode.
26
Remove cover by snaping off from top or bottom. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.
29
Attach front cover to wall control with screws provided.
21
Plug white wire from fan to white wire from light kit. Then plug black from fan to black from light kit.
24
Attach glass by locating dimples in light kit and aligning it with the groves in glass and twisting clockwise till tight.
27
Attach cover of remote by placing over buttons and snaping into place.
30
Light dim- mer for up and down lights
Fan reverse button
To control fan speed select from High, Medium or low speed buttons. To turn the fan off press the Fan on / off button. To dim upper lights press and hold U/L botton. To dim Lower lights press and hold D/L button. To turn off either up or down light press and quickly release either U/L or D/L button. Press button marked REV to reverse the rotation direction of the fan blades
