ROUBLE HOOTING

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In

some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble

Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our

 

Customer Service Center at the

 

number printed on your parts list insert sheet.

Warning: Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting

means to prevent power from being switched on accidentally. When the service disconnecting means cannot

 

be locked, securely fasten a

Trouble

prominent warning device, such as a tag, to the service panel.

Suggested Remedy

1. If fan does not start:

1.Check main and branch circuit fuses or circuit breakers.

 

2.Check line wire connections to fan and switch wire connections in switch housing.

 

CAUTION: Make sure main power is turned off.

 

3.Make sure forward/reverse switch is firmly in up or down position. Fan will not operate when

 

switch is in the middle.

 

4.Make sure that shipping stabilizer tabs have been removed from motor.

2.If fan sounds noisy: 1.Check to make sure all screws in motor housing are snug (not over tightened). 2.Check to make sure the screws which attach the fan blade holder to the motor 3.Check to make sure wire nut connectors in switch housing are not rattling against against the interior wall of the switch housing.

CAUTION: Make sure main power is turned off before entering switch housing.

4.If using an optional Ceiling Fan Light Kit, check to be sure the screws securing the glassware finger tight. Check to be sure light bulb is tight in socket and not touching glass shade(s). If vibra- tion persists from glass, remove glass and install a 1/4" wide rubber band on glass neck to act as an insulator. Replace glass and tighten screws against rubber band.

5.Some fan motors are sensitive to signals from Solid State variable speed controls.

DO NOT USE a Solid State variable speed control.

6.Allow "break-in" period of 24 hours. Most noises associated with a new fan will disappear after

this period.are tight.each other orare

3. If fan wobbles: 1.Make sure that the ridge of the canopy engages the notch in the downrod ball. (See illustration in Step #6 of Downrod Mount installation).

2.Check that all blades are screwed firmly into blade holders. 3.Check that all blade holders are tightened securely to motor.

4.Make sure that canopy and mounting bracket are tightened securely to ceiling junction box and junction box is mounted firmly to ceiling joist.

5.Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure this distance from blade tip to ceilng. Keeping measure within 1/8", rotate the fan until the next blade is positioned for measure- ment. Repeat for each blade. If all blade levels are not equal, you can adjust blade levels by the fol- lowing procedure. To adjust a blade tip down, insert a washer (not supplied) between the blade and blade holder at the screw closest to the motor. To adjust a blade tip up, insert washer (not supplied) between the blade and blade holder at the two screws farthest from the motor. Reverse the posi- tion of the washer if blades mount from top of blade.

6.If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistrib- ute the weight and possibly result in smoother operation.

4. If light does not work: 1.Check blue wire from fan to make sure it is connected to hot wire from house. 2.Check for loose or disconnected wires in fan switch housing.

3.Check for loose or disconnected wires in light kit. 4.Check for faulty light bulbs.

CAUTION: Make sure main power is turned off before entering switch housing.

Customer Service Center:

740 S.W. Loop 820, Suite 110

Fort Worth, Texas 76115

1-800-519-4092

Page 4 Page 5
Page 5
Image 5
Monte Carlo Fan Company 5MS52 installation instructions Trouble, Suggested Remedy, If fan does not start
Page 4 Page 5

5MS52 specifications

The Monte Carlo Fan Company 5MS52 is a highly regarded ceiling fan that blends contemporary style with advanced technology, making it an ideal choice for modern living spaces. Measuring 52 inches in diameter, the 5MS52 is designed to efficiently circulate air, providing comfort in both warm and cool conditions.

One of the standout features of the Monte Carlo 5MS52 is its elegant design, which includes a sleek motor housing and stylish blades available in various finishes. The fan's aesthetic appeal makes it a versatile addition to diverse decor styles, from minimalist to transitional. The blades are designed for optimal airflow while adding a touch of sophistication to any room.

The 5MS52 is equipped with a powerful, energy-efficient motor that ensures quiet operation. This is an important consideration for homeowners who seek comfort without the distraction of noise. Additionally, the fan can be mounted in multiple configurations, including standard, angled, or flush mount, allowing it to fit seamlessly in any space, whether it's a living room, bedroom, or patio.

Another key feature is the integrated LED light kit, providing illumination while enhancing energy efficiency. The dimmable light allows users to adjust brightness levels, ensuring the perfect ambiance for any occasion. The ability to control both the fan speed and lighting through a remote control adds to the convenience, giving users complete command from anywhere in the room.

Monte Carlo incorporates cutting-edge technologies into the 5MS52, such as reversible motor functionality, enabling the fan to efficiently switch between the downdraft mode for cooling and the updraft mode for warming during cooler months. This versatility makes it a year-round solution for climate control.

Furthermore, the fan features a clean and easy installation process, ensuring that even those who are not particularly handy can set it up with relative ease. It is also compatible with universal remote controls and smart home systems, making it increasingly popular in smart homes.

In summary, the Monte Carlo Fan Company 5MS52 is a well-rounded ceiling fan that effectively combines style, functionality, and modern technology. Its sleek design, efficient motor, LED lighting, and ease of installation make it a top choice for homeowners looking to enhance their interiors while maintaining comfort throughout the year.
Top Page Image Contents