Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems 2H23-50R, 2H33-37R manual Chapter Installation, Required Tools

Models: 2H23-50R 2H33-37R

1 182

Download 182 pages 26.68 Kb

Page 27

CHAPTER 3

INSTALLATION

Only qualiﬁed personnel should install the 2H23-50R or 2H33-37R.

This chapter provides the instructions required to install the 2H23-50R or 2H33-37R. Follow the order of the sections listed below to ensure a proper installation.

•Required Tools (Section 3.1)

•Unpacking the Device (Section 3.2)

•Installing Options (Section 3.3)

•Installing the Device (on a shelf or tabletop, or into a standard rack) (Section 3.4)

•Connecting to the Network (Section 3.5)

•Completing the Installation (Section 3.6)

3.1REQUIRED TOOLS

A Phillips screwdriver is required to install the 2H23-50R and 2H33-37R.

2H23-50R/2H33-37R User’s Guide

3-1

Image 27

Cabletron Systems 2H23-50R, 2H33-37R manual Chapter Installation, Required Tools

Contents

CONN 2H23-50R/2H33-37R SmartSwitch 2100 User’s Guide9032286-04 CONN CONNPage Only qualiﬁed personnel should perform installation procedures FCC NOTICE2H23-50R/2H33-37R User’s Guide 2H23-50R/2H33-37R User’s Guide INDUSTRY CANADA NOTICEVCCI NOTICE CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT2H23-50R/2H33-37R User’s Guide EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITYCABLETRON SOFTWARE PROGRAM LICENSE UNITED STATES GOVERNMENT RESTRICTED RIGHTS2H23-50R/2H33-37R User’s Guide SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERSSAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS LASER RADIATION AND CONNECTORSManufacturer’s Name Cabletron Systems, Inc DECLARATION OF CONFORMITY2H23-50R/2H33-37R User’s Guide Application of Council Directives 89/336/EEC 73/23/EEC2H23-50R/2H33-37R User’s Guide INTRODUCTION CONTENTSINSTALLATION CHAPTERCHAPTER ContentsTROUBLESHOOTING CHAPTERContents 2H23-50R/2H33-37R User’s GuideSNMP Traps Screen OPTIONAL INSTALLATIONS AND ContentsSPECIFICATIONS SPECIFICATIONS1.1 USING THIS GUIDE CHAPTER INTRODUCTION1.2 STRUCTURE OF THIS GUIDE Chapter 1 Introduction 1.3 OVERVIEWThe 2H23-50R is a high speed network repeater/switch device that provides four Ethernet networks and four Fast Ethernet networks RJ21 MicroLANs, CONN 1 through CONN 4 and two slots 5 and 6 for optional Fast Ethernet Interface Modules. The RJ21 connectors each consist of 12 repeater ports that are able to reside on the Ethernet 1.3.2 Full Duplex Switched Ethernet 1.3.1 Connectivity1.3.3 Auto-Negotiation 1.3.5 Runtime IP Address Discovery 1.3.4 SmartTrunking1.3.6 Management 1.3.7 Switching Options1.3.9 Year 2000 Compliant 1.3.10 LANVIEW Diagnostic LEDs1.4 OPTIONAL FEATURES 1.3.8 Standards Compatibility1.4.1 Fast Ethernet Interface Modules 1.4.2 High Speed Interface ModulesTable 1-1 Fast Ethernet Interface Modules 2H23-50R/2H33-37R User’s Guide 1.5 DOCUMENT CONVENTIONSThe following conventions are used throughout this document Document Conventions1.6 GETTING HELP 1.7 RELATED MANUALS Chapter 1 Introduction 1-122H23-50R/2H33-37R User’s Guide CHAPTER NETWORK REQUIREMENTS 2.1 SmartTrunk2.2 10BASE-T NETWORK Multimode Fiber Optic Cable Length 2.3 100BASE-TX NETWORK2.4 100BASE-FX FIBER OPTIC NETWORK Single Mode Fiber Cable Lengths3.1 REQUIRED TOOLS CHAPTER INSTALLATION3.2 UNPACKING THE DEVICE 3.3 INSTALLING OPTIONSInstallation 3.4 INSTALLING THE DEVICE3.4.1 Tabletop or Shelf Installation Guidelines for Tabletop and Shelf InstallationsGuidelines for the Rackmount Installation 3.4.2 Rackmount InstallationRack mounting the 2H23-50R or 2H33-37R involves the following Figure 3-3 Installing the Rackmount Brackets Figure 3-4 Installing the Device in a RackRack Mounting the Device 3.4.3 Connecting Power to the Device 3.5 CONNECTING TO THE NETWORK 3.5.1 Connecting Cables to CONN 1 Through 3.5.2 Connecting a UTP Segment to the FE-100TX 2251-31 Figure 3-7 FE-100TX Crossover SwitchFigure 3-8 Cable Pinouts - RJ45 Crossover Cable 100 FE-100TXRX LED TX LED Figure 3-9 FE100-TX Port Connection3.5.3 Connecting a Fiber Optic Segment to the FE-100FX and FE-100F3 TX LED SC ConnectorFigure 3-10 Fiber Optic Cable Connection RX LED3.6 COMPLETING THE INSTALLATION Chapter 3 Installation 3-162H23-50R/2H33-37R User’s Guide 4.1 USING LANVIEW CHAPTER TROUBLESHOOTINGChapter 4 Troubleshooting Flashing indicates an LED ﬂashing randomly2H23-50R/2H33-37R User’s Guide Color Using LANVIEW2H23-50R/2H33-37R User’s Guide Table 4-1 LANVIEW LEDsChapter 4 Troubleshooting 2H23-50R/2H33-37R User’s GuideTable 4-1 LANVIEW LEDs Continued 100 LED Receive RX LED 4.2 FE-100TX LEDA link exists if the associated port 5 or 6 RX LED is on Chapter 4 TroubleshootingTable 4-2 10/100 LED Indications When RX LED Is On Table 4-3 10/100 LED Indications When RX LED Is Off2H23-50R/2H33-37R User’s Guide 4.3 TROUBLESHOOTING CHECKLISTTroubleshooting Checklist Table 4-4 Troubleshooting Checklistdowntime of up to two minutes will result from this action 4.4 USING THE RESET BUTTON5.1 OVERVIEW CHAPTER LOCAL MANAGEMENTTable 5-1 Keyboard Conventions 5.2 LOCAL MANAGEMENT KEYBOARD CONVENTIONSChapter 5 Local Management 2H23-50R/2H33-37R User’s Guide5.3 MANAGEMENT TERMINAL SETUP Management Terminal Connection 5.3.1 Console Cable Connection2H23-50R/2H33-37R User’s Guide 5.3.2 Management Terminal Setup ParametersManagement Terminal Setup Table 5-2 VT Terminal Setup5.3.3 Telnet Connections 5.3.4 Monitoring an Uninterruptible Power Supply Figure 5-3 Local Management Password Screen 5.4 ACCESSING LOCAL MANAGEMENT5.4.1 Navigating Local Management Screens 5-10 Figure 5-4 802.1D Switching Mode, LM Screen HierarchyFigure 5-5 802.1Q Switching Mode, LM Screen Hierarchy Chapter 5 Local Management5.4.3 Exiting Local Management Screens 5.4.2 Selecting Local Management Menu Screen ItemsTo exit LM using the RETURN command, proceed as follows 2H23-50R/2H33-37R User’s Guide 5.5 DEVICE MENU SCREENDEVICE CONFIGURATION Device Menu ScreenDEVICE CONFIGURATION DEVICE STATISTICSNETWORK TOOLS 5.6 DEVICE CONFIGURATION MENU SCREEN SWITCH CONFIGURATION SMARTTRUNK CONFIGURATIONSection 5.7.9 provides instructions on setting the operational mode DEVICE SPECIFIC CONFIGURATION GENERAL CONFIGURATIONSWITCH CONFIGURATION SMARTTRUNK CONFIGURATION5.7 GENERAL CONFIGURATION SCREEN TFTP Gateway IP Addr Modiﬁable Default Gateway ModiﬁableIP Address Modiﬁable Subnet Mask ModiﬁableDisplays the total time that the device has been operating IP Fragmentation Toggle Com ToggleApplication Toggle Clear NVRAM Toggle5.7.1 Setting the IP Address Figure 5-11 Conﬁguration Warning Screen 5.7.2 Setting the Subnet Mask5.7.4 Setting the TFTP Gateway IP Address 5.7.3 Setting the Default Gateway5.7.5 Setting the Device Date 5.7.7 Entering a New Screen Refresh Time 5.7.6 Setting the Device Time5.7.8 Setting the Screen Lockout Time 5.7.9 Setting the Operational Mode802.1D SWITCHING, 802.1Q SWITCHING, or SECURE FAST VLAN Figure 5-12 Conﬁguration Warning Screen General Conﬁguration Screen2H23-50R/2H33-37R User’s Guide 5-275.7.10 Conﬁguring the COM Port 2H23-50R/2H33-37R User’s Guide 6. When the message “SAVED OK” displays, the edits you made are saved4. Use the arrow keys to highlight YES. Press ENTER General Conﬁguration Screen5.7.11 Clearing NVRAM 5.7.10.1 Changing the COM Port ApplicationClear NVRAM as follows 5.7.12 Enabling/Disabling IP Fragmentation Figure 5-15 SNMP Community Names Screen 5.8 SNMP COMMUNITY NAMES SCREENCommunity Name Modiﬁable Access Policy Read-Only5.8.1 Establishing Community Names 5.9 SNMP TRAPS SCREEN Enable Traps Toggle 5.9.1 Conﬁguring the Trap Table5.10 SWITCH CONFIGURATION SCREEN Number of Ports Read-Only Switch Conﬁguration ScreenSwitch Address Read-Only Figure 5-17 Switch Conﬁguration ScreenType of STA Selectable Age Time ModiﬁablePort # Read-Only Displays the hardware address assigned to each listed port 5.10.1 Setting the STA 5.10.2 Setting the Age Time Field5.10.3 Setting Enabling or Disabling the Port Status Figure 5-18 Device Speciﬁc Conﬁguration Menu Screen 5.11 DEVICE SPECIFIC CONFIGURATION MENU SCREENSYSTEM RESOURCES HIGH SPEED INTERFACE CONFIGURATION802.1Q VLAN CONFIGURATION Port Based VLAN User’s GuideREPEATER CONFIGURATION MENU 5.12 SYSTEM RESOURCES SCREENNVRAM Installed Read-only 5.12.1 Setting the Reset Peak Switch UtilizationFlash Memory Installed Read-only DRAM Installed Read-only5.13 HIGH SPEED INTERFACE CONFIGURATION SCREEN 2H23-50R ONLY Link Status Read-only Port Type Read-onlyDesired Oper. Mode Selectable Current Oper. Mode Read-only5.13.1 Conﬁguring an FE-100FX or FE-100F3 5.13.1.1 Setting the FE-100FX or FE-100F3 Operational Mode5.13.2.1 Setting the FE-100TX Operational Mode 5.13.2.2 Setting the FE-100TX Advertised Ability5.13.2 Conﬁguring an FE-100TX 5.14 FLASH DOWNLOAD SCREEN Download Method Selectable The following brieﬂy deﬁnes each ﬁeld of the Flash Download screenLast Image File Name Read-only Reboot After Download Modiﬁable only when the user chooses RUNTIMETFTP Gateway IP Addr Selectable Last Image Server IP Read-only5.14.2 Image File Download Using TFTP 5.14.1 Image File Download Using BootP5.14.3 Image File Download Using Runtime Table 5-6 CONN/Port Organization 5.15 PORT REDIRECT FUNCTION SCREENShows which ports are currently set as destination ports 5.15.1 Displaying the Source and Destination Entries 5.15.2 Changing Source and Destination Ports Broadcast frames received above the threshold setting are dropped 5.16 BROADCAST SUPPRESSION SCREENThe following explains each ﬁeld of the Broadcast Suppression screen 5.16.2 Setting the Reset Peak 5.16.1 Setting the ThresholdFigure 5-24 VLAN Main Menu Screen 5.17 THE VLAN MAIN MENU 802.1Q SCREENFigure 5-25 Repeater Conﬁguration Menu Screen 5.18 REPEATER CONFIGURATION MENU SCREENPORT LEVEL SECURITY CONFIGURATION 5.19 REPEATER PORT CONFIGURATION SCREENREPEATER PORT CONFIGURATION DEVICE LEVEL SECURITY CONFIGURATIONPORT# Read-only Figure 5-26 Repeater Port Conﬁguration ScreenTable 5-8 CONN/Repeater Port Relationship Displays the Link status Link or No Link of the port 5.19.1 Setting the Port Operating Mode 5.19.2 Enabling /Disabling Ports 5.19.3 Setting All Ports5.19.4 Enabling/Disabling Network Ports 5.20 DEVICE LEVEL SECURITY CONFIGURATIONFigure 5-27 Device Level Security Conﬁguration Screen Connector Read-OnlyTable 5-10 CONN/Repeater Port Relationship Security State Selectable5.20.1 Setting the Device Level Security 5-75 5.21 PORT LEVEL SECURITY CONFIGURATION SCREENPort Level Security Conﬁguration Screen 2H23-50R/2H33-37R User’s GuideTable 5-12 CONN/Network Organization Port Read-onlyNetwork Read-only Table 5-11 CONN/Repeater Port Relationship2H23-50R/2H33-37R User’s Guide Port Level Security Conﬁguration ScreenSecurity State Selectable Action On Intruder ToggleAddress Modiﬁable 5.21.1 Setting the Port Level Security5.22 DEVICE STATISTICS MENU SCREEN The Device Statistics Menu screen displays the following menu items REPEATER STATISTICS 5.23 SWITCH STATISTICS SCREENThe Switch Statistics screen displays the following ﬁelds CLEAR COUNTERS Command 5.24 INTERFACE STATISTICS SCREENInOctets Read-Only InErrors Read-OnlyInterface Read-Only Name Read-OnlyOutUnicast Read-Only OutErrors Read-OnlyAdmin Status Read-Only OutOctets Read-Only5.24.1 Displaying Interface Statistics 5.25 RMON STATISTICS SCREEN 5.24.2 Using the Clear Counters CommandThe following brieﬂy deﬁnes each ﬁeld of the RMON Statistics screen Broadcast Pkts Read-only CRC Align Errors Read-onlyDrop Events Read-only Collisions Read-onlyTotal Octets Read-only Fragments Read-onlyJabbers Read-only Total Packets Read-only5.25.1 Displaying RMON Statistics 5.25.2 Using the Clear Counters Command5.26 REPEATER STATISTICS SCREEN Operating statistics for each repeater port 1 through 48 for theThe following describes each ﬁeld of the Repeater Statistics screen For details on how to use this ﬁeld, refer to Section Displays the total number of errors 5.26.1 Displaying Network Statistics 5.26.2 Displaying Network Port StatisticsPORT # Command 5.27 NETWORK TOOLS 5.26.3 Using the Clear Counters CommandExample SyntaxDescription OptionsOptions 5.27.1 Built-in Commandsarp options SyntaxOptions ExampleSyntax DescriptionExample SyntaxDescription OptionsOptions ExampleSyntax DescriptionExample SyntaxresetNot Applicable OptionsDescription not reached, the command displays all next-hopExample SyntaxSyntax OptionsNot Applicable ExampleDescription Examplelinktrap SyntaxDescription The atmstpstate command allows the user tooption as enable, disable, or status. The STATE SyntaxOptions 5.27.2 Special CommandsSyntax DescriptionChapter 5 Local Management 5-1082H23-50R/2H33-37R User’s Guide APPENDIX A SPECIFICATIONS A.1 DEVICE SPECIFICATIONSA.2 PHYSICAL PROPERTIES A.3 ELECTRICAL SPECIFICATIONS A.4 ENVIRONMENTAL REQUIREMENTSA.5 INPUT/OUTPUT PORTS A.7 REGULATORY COMPLIANCE A.6 COM PORT PINOUT ASSIGNMENTS2H23-50R/2H33-37R User’s Guide Appendix A SpeciﬁcationsB.1 FE-100TX APPENDIX B FE-100TX, FE-100FX, AND FE-100F3 SPECIFICATIONSB.2 FE-100FX Appendix B FE-100TX, FE-100FX, and FE-100F3 Speciﬁcations2H23-50R/2H33-37R User’s Guide FE-100f3 B.3 FE-100F3FE-100F3 2H23-50R/2H33-37R User’s Guide2H23-50R/2H33-37R User’s Guide Appendix B FE-100TX, FE-100FX, and FE-100F3 SpeciﬁcationsC.1 REQUIRED TOOLS APPENDIX C OPTIONAL INSTALLATIONS AND MODE SWITCH BANK SETTINGSC.2 REMOVING THE CHASSIS COVER Appendix C Optional Installations and Mode Switch Bank Settings2H23-50R/2H33-37R User’s Guide To remove the chassis cover, proceed as follows Figure C-1 Removing the Chassis Cover C.2.1 Setting the Mode SwitchesSwitch deﬁnitions and positions are as follows Switches 1 through 4 - For Cabletron Systems use onlyFigure C-2 Mode Switch Location/Component Layout Switch 7 - Clear NVRAM. Changing the position of this switch resets NVRAM on the next power-up. All user-entered parameters, such as the IP address, device names, etc., are reset to the factory default settings. Once the device resets, you can either use the factory default settings or reenter your own parameters Primary Power Supply C.3 INSTALLING OPTIONAL FAST ETHERNET INTERFACE MODULESInstalling Optional Fast Ethernet Interface Modules Figure C-3 Fast Ethernet Interface Module Connector LocationTo install a Fast Ethernet Interface Module in port slot 5 or 6 of the Installing Optional Fast Ethernet Interface Modules 2. Remove the screw from the rear standoff. Save the screw2H23-50R/2H33-37R User’s Guide 7. Reinstall the cover Index-1 INDEXNumerics 2H23-50R/2H33-37R User’s GuideIndex Index-22H23-50R/2H33-37R User’s Guide Index 2H23-50R/2H33-37R User’s GuideIndex-3 Index Index-42H23-50R/2H33-37R User’s Guide Index 2H23-50R/2H33-37R User’s GuideIndex-5 Index Index-62H23-50R/2H33-37R User’s Guide