Cabletron Systems 2H33-37R, 2H23-50R Accessing Local Management, Local Management Password Screen

Chapter 5: Local Management

5.4ACCESSING LOCAL MANAGEMENT

Access to Local Management is controlled through the Local Management Password screen shown in Figure 5-3. Whenever a connection is made to the 2H23-50R or 2H33-37R the Local Management Password screen displays. Before continuing, the user must enter a password (community name) which is compared to the previously stored passwords. The level of access allowed the user depends on the password. To set or change passwords, refer to Section 5.8. The following steps describe the procedure to access Local Management.

1.Turn on the terminal. Press ENTER (this may take up to four times, because the COM port auto-senses the baud rate of the terminal) until the 2H23-50R or 2H33-37R Local Management Password screen displays. It is the automatic line speed seeking feature of the port that makes it necessary at times to press ENTER several times.

Event Message Line
2H23-50 LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc, 1998
Device Serial Number:	XXXXXXXXX
Device Hardware Revision:	XX
Device Firmware Revision:	X.XX.XX
Device BOOTPROM Revision:	X.XX.XX
Enter Password:
	22861-12
Figure 5-3 Local Management Password Screen

2.Enter the Password and press ENTER. The default super-user access password is “public” or press ENTER.

5-8 2H23-50R/2H33-37R User’s Guide