Cabletron Systems 2H23-50R, 2H33-37R manual Remove the screw from the rear standoff. Save the screw

Installing Optional Fast Ethernet Interface Modules

Coverplate

Rear

Standoff

Front

Standoffs

2286-38

Figure C-4 Coverplate Removal

2.Remove the screw from the rear standoff. Save the screw.

When installing an FE-100FX or FE-100F3 module into the

!2H23-50R, remove the rubber plug on the module before CAUTION proceeding.

3.See Figure C-5. Gently pull the faceplate of the 2H23-50R forward to allow room for the Fast Ethernet Interface Modules to be aligned over the connector.

In the following step, take care when inserting the Fast Ethernet

!Interface Module into the Motherboard connector, so that the

CAUTION	pins do not bend. Otherwise, the Fast Ethernet Interface Board
	and the Motherboard could be damaged.

2H23-50R/2H33-37R User’s Guide C-9