Cabletron Systems 2H23-50R, 2H33-37R manual Syntax, Description, Options, Example

Network Tools

There are two categories of commands in the command set.

•Built-in Commands – Allow the user to access and manage network devices. The commands are arp, bridge, defroute, netstat, ping, reset, show, traceroute, soft-reset, telnet, link_trap, and atm_stp_state.

•Special Commands – Allow the user to exit from Network Tools. The commands are done, exit, and quit.

NOTES

The conventions used in describing the commands in Network Tools are as follows:

Arguments enclosed by [ ] are required.

Arguments enclosed by < > are optional.

In the following command examples, the information entered by the user is shown in bold Helvetica font.

To abort the output or interrupt a process, press the CONTROL key and c key simultaneously, designated as ^C here.

The commands are presented in the following format:

command:

Syntax:	Shows the required command format. It
	indicates where arguments, if any, must be
	specified.
Description:	Briefly describes the command and its uses.
Options:	Lists any additional fields in the appropriate
	format which may be added to the command.
Example:	Shows an example of the command.

2H23-50R/2H33-37R User’s Guide 5-97