Cabletron Systems 2H33-37R, 2H23-50R Unpacking the Device, Installing Options, Contents of Carton

Chapter 3: Installation

3.2UNPACKING THE DEVICE

To unpack the device and verify the contents of the shipment, proceed as follows:

1.Open the carton and remove the packing material.

2.Verify the contents of the carton as listed in Table 3-1.

Table 3-1 Contents of Carton

Item	Quantity
2H23-50R or 2H33-37R	1
Antistatic Wrist Strap	1
Console Cable Kit	1
Rackmount Kit	1
Strain-Relief Bracket	1
Release Notes	1
Power Cord	2
Manual Accessory Kit	1

3.Remove the black and yellow tape seal on the non-conductive bag to remove the device.

4.Perform a visual inspection of the device for any signs of physical damage. If there are any items missing or damaged, contact the Cabletron Systems Global Call Center as described in Section 1.6.

3.3INSTALLING OPTIONS

NOTE

Install any optional equipment before proceeding to Section 3.4.

If the 2H23-50R is to be installed with an optional Fast Ethernet Interface Module, refer to Appendix C for installation instructions. If the

2H33-37R is to be installed with an optional HSIM, refer to the installation instructions in the associated HSIM user’s guide.

3-2 2H23-50R/2H33-37R User’s Guide