Cabletron Systems 2H23-50R, 2H33-37R manual System Resources Screen, Repeater Configuration Menu

System Resources Screen

REPEATER CONFIGURATION MENU

The Repeater Configuration Menu screen enables the user to select the Repeater Port Configuration screen, which provides access to the security screens: Repeater Port Configuration, Device Level Security Configuration, and Port Level Security Configuration. For details refer to Section 5.18.

5.12SYSTEM RESOURCES SCREEN

The System Resources screen, Figure 5-19, provides information concerning the processor used in the 2H23-50R or 2H33-37R and the amount of FLASH memory, DRAM, and NVRAM that is installed and how much of that memory is available. This screen also allows the user to monitor the current processor (switch) utilization and the peak switch utilization.

To access the System Resources screen from the Device Specific Configuration Menu screen, use the arrow keys to highlight the SYSTEM RESOURCES menu item and press ENTER. The System Resources screen displays.

Event Message Line

	2H23-50R LOCAL MANAGEMENT
		System Resources
Device Type: 2H23-50R			Firmware Revision: XX.XX.XX
			BOOTPROM Revision: XX.XX.XX
	CPU Type: i960 HT 75 Mhz
Flash Memory Installed:	4 MB	Available:	XXXXX Bytes
DRAM Installed:	20 MB	Available:	XXXXX Bytes
NVRAM Installed:	XX KB	Available:	XXXXX Bytes

Current Switch Utilization: 66%

Peak Switch Utilization: 75%

Reset Peak Switch Utilization: [NO]

		RETURN
SAVE	EXIT	RETURN
		22861-23

Figure 5-19 System Resources Screen

2H23-50R/2H33-37R User’s Guide 5-45