Cabletron Systems 2H23-50R, 2H33-37R manual Interface Statistics Screen

Interface Statistics Screen

CLEAR COUNTERS (Command)

This command clears all the counters of the displayed ports to zero. To clear the counters, use the arrow keys to highlight CLEAR COUNTERS at the bottom of the screen, then press ENTER.

5.24INTERFACE STATISTICS SCREEN

The Interface Statistics screen, Figure 5-31, is used to gather MIB-II statistics for all the 2H23-50R or 2H33-37R interfaces with the exception of an installed HSIM in a 2H33-37R.

NOTE

Cabletron Systems HSIMs gather their own statistics that may be viewed via the Local Management screens of the applicable HSIM. Refer to your HSIM documentation for information on how to access these screens.

To access the Interface Statistics screen, use the arrow keys to highlight the INTERFACE STATISTICS menu item on the Device Statistics Menu screen and press ENTER. The Interface Statistics screen displays.

Event Message Line

	2H23-50R LOCAL MANAGEMENT
		Interface Statistics
Device Typee: 2H23-50R			Firmware Revision:	XX.XX.XX
			BOOTPROM Revision: XX.XX.XX
Interface: 1	Name: Ethernet Frontpanel
InOctets:	7500456	Address:	00-00-00-00-00-00
InUnicast:	6789	Last Change:	xx days 00:00:00
InNonUnicast:	0	Admin Status:	Up
InDiscards:	0	Oper Status:	Down
InErrors:	0
InUnknownProtos:	0	MTU:	1514
OutOctets:	0	Speed:	100000000
OutUnicast:	0
OutNonUnicast:	0
OutDiscards:	0	Link Status:	No Link
OutErrors:	0	Duplex Mode:	Standard
OutQLen:	0
	CLEAR COUNTERS		EXIT
Interface: [nn]					RETURN

22861_64

Figure 5-31 Interface Statistics Screen

2H23-50R/2H33-37R User’s Guide 5-83