Cabletron Systems 2H33-37R, 2H23-50R Shows which ports are currently set as destination ports

Chapter 5: Local Management

Port Redirect operates at a switch interface level and not at a repeater port level. If traffic is redirected to interfaces that include active repeater ports, then the redirected traffic is transmitted out all of the repeater ports connected to the interface.

To access the Port Redirect Function screen from the Device Specific Configuration Menu screen, use the arrow keys to highlight the PORT REDIRECT FUNCTION menu item and press ENTER. The Port Redirect Function screen displays.

Event Message Line
	2H23-50R LOCAL MANAGEMENT
	Port Redirect Function
Device Type: 2H23-50R		Firmware Revision:		XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
Source Port:	Destination Port:	Remap Errors:
============	============	============
1	2	ON
1	3	ON
1	4	ON
2	1	OFF
2	3	OFF
3	4	ON
3	5	ON
3	6	ON
Source Port [1]	Destination Port [1]	Errors	[ON]	Status [ADD]
				RETURN
SAVE	NEXT	PREVIOUS	EXIT		RETURN

22861_22

Figure 5-22 Port Redirect Function Screen

The following definitions briefly explain each field of the Port Redirect Function screen:

Source Port (Read-only)

Shows which ports are currently set as source ports. To display the ports, refer to Section 5.15.1.

Destination Port (Read-only)

Shows which ports are currently set as destination ports.

5-58 2H23-50R/2H33-37R User’s Guide