Cabletron Systems 2H33-37R, 2H23-50R manual Repeater Statistics Screen

Chapter 5: Local Management

5.26REPEATER STATISTICS SCREEN

Operating statistics for each repeater port (1 through 48 for the

2H23-50R, or 1 through 36 for the 2H33-37R) and its corresponding network interface are displayed via the Repeater Statistics screen shown in Figure 5-33.

To access the Repeater Statistics screen, use the arrow keys to highlight the REPEATER STATISTICS menu item on the Device Statistics Menu screen and press ENTER. The Repeater Statistics screen displays.

Event Message Line

	2H23-50R LOCAL MANAGEMENT
		Repeater Statistics
Device Name: 2H23-50R			Firmware Revision:	XX.XX.XX
			BOOTPROM Revision: XX.XX.XX
		Network #: xx	Port #: xx
Bytes Received:		7500456	7500456
Frames received:		6789	6789
Total Errors:		0	0
Collisions:		0	0
OOW Collisions:		0	0
CRC Errors:		0	0
Alignment	Errors:	0	0
Undersize Packets:		0	0
Oversize Packets		0	0
Broadcasts		0	0
Multicasts:		0	0
Link Status:		Link	No Link
Admin Status:		Enabled	Disabled
NETWORK #: xx	PORT #: xx
		CLEAR COUNTERS	EXIT		RETURN

22862-29

Figure 5-33 Repeater Statistics Screen

The following describes each field of the Repeater Statistics screen:

Network # (Read-Only)

Indicates the current network port (1 through 8, for the 2H23-50R or 1 through 6, for the 2H33-37R) for which statistics are displayed. This field is automatically set by selecting a port number in the PORT # command field at the bottom of the screen. For example, if 4 is selected in the PORT

#command field, the statistics for Network 4 (CONN 2, 100 Mbps Network Port) displays along with the statistics for the selected port.

5-92 2H23-50R/2H33-37R User’s Guide