Chapter 5: Local Management
soft_reset
Syntax:soft_reset
Description:This command restarts the software image, which restores the user configuration settings from NVRAM. The user will be queried to confirm the reset command to ensure against unwanted resets.
The Network Tools connection to the device will be terminated
TIP upon execution of this command.
Options: | Not Applicable |
Example:
telnet:
Syntax: | telnet [IP address] [Port #] |
Description:The telnet command allows the user to communicate with another host (that supports Telnet connections) using the Telnet protocol. The user must specify the remote host using its IP address. The [IP address] field is mandatory. If no Port number is specified, telnet will attempt to contact the host at the default port.
Options: | Not Applicable |
|
