Broadcast Suppression Screen
5.16.1 Setting the Threshold
To set the Threshold, proceed as follows:
1.Use the arrow keys to highlight the Threshold field for the selected port.
2.Type in the numbers for the desired limit. Only enter values in increments of ten (for example; 10, 20, 30, etc.).
3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4.Press ENTER. The message “SAVED OK” displays.
5.16.2 Setting the Reset Peak
To set the Reset Peak field to YES or NO, proceed as follows:
1.Use the arrow keys to highlight the Reset Peak field for the selected port.
2.Press the SPACE bar to select YES or NO.
3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4.Press ENTER. The message “SAVED OK” displays and the Time Since Peak field is also reset.
|
