Cabletron Systems 2H33-37R, 2H23-50R manual Displays the Link status Link or No Link of the port

Chapter 5: Local Management

NETWORK# (Read-only)

Indicates the network on the connector selected in the CONNECTOR field. Table 5-9shows the association between the CONN and Network Ports on the device.

Table 5-9 CONN/Port Organization

2H23-50R or 6H123-50		2H33-37R or 6H133-37
CONN 1 = Network Port 1,	10 Mbps	CONN 1 = Network Port 1,	10 Mbps
Network Port 2,	100 Mbps	Network Port 2,	100 Mbps
CONN 2 = Network Port 3,	10 Mbps	CONN 2 = Network Port 3,	10 Mbps
Network Port 4,	100 Mbps	Network Port 4,	100 Mbps
CONN 3 = Network Port 5,	10 Mbps	CONN 3 = Network Port 5,	10 Mbps
Network Port 6,	100 Mbps	Network Port 6,	100 Mbps
CONN 3 = Network Port 7,	10 Mbps	HSIM = Port 7
Network Port 8,	100 Mbps

LINK STAT. (Read-only)

Displays the Link status (Link or No Link) of the port.

CURRENT OPER. (Read-only)

Displays the current operating mode of the port.

MODE DESIRED OPER. (Selectable)

This field steps through the following operating mode options: Auto-Neg (Auto Negotiation), 10Base-T, and 100Base-TX.

•When Auto-Neg. is selected, the port Auto-Negotiates with the device to which it is attached to determine its Operating Mode (10 Mbps or 100 Mbps).

•When 10Base-T is selected, the port is forced to operate in standard Ethernet mode (10 Mbps) only.

•When 100Base-TX is selected, the port is forced to operate in Fast Ethernet mode (100 Mbps) only.

To set the port operating mode, refer to Section 5.19.1.

5-68 2H23-50R/2H33-37R User’s Guide