Cabletron Systems 2H33-37R manual HIGH SPEED INTERFACE CONFIGURATION SCREEN 2H23-50R ONLY

High Speed Interface Configuration Screen (2H23-50R Only)

5.13HIGH SPEED INTERFACE CONFIGURATION SCREEN (2H23-50R ONLY)

NOTE

When the HIGH SPEED CONFIGURATION MENU item is selected for the 2H33-37R, the applicable HSIM Setup screen displays. Refer to the HSIM user’s guide to set operating parameters for the HSIM installed in the 2H33-37R.

To access the High Speed Interface Configuration menu screen from the Device Specific Configuration Menu screen, use the arrow keys to highlight the HIGH SPEED INTERFACE CONFIGURATION menu item and press ENTER. The High Speed Interface Configuration menu screen, Figure 5-20, displays.

NOTE

The High Speed Interface Configuration screen,Figure 5-20, applies only to slots 5 and 6 of the 2H23-50R. This screen supports the FE-100TX, FE-100FX, and FE-100F3 Fast Ethernet Interface Modules that operate at 100 Mbps.

The High Speed Interface Configuration screen displays the types of interfaces installed in slots 5 and 6, their current operating mode, and indicates if the ports are linked. This screen also allows the user to enable or disable Auto-Negotiation and set the Advertised Ability.

2H23-50R/2H33-37R User’s Guide 5-47