Cabletron Systems 2H33-37R, 2H23-50R manual Port Type Read-only, Link Status Read-only

Chapter 5: Local Management

Event Message Line

	2H23-50R LOCAL MANAGEMENT
	High Speed Interface Configuration
Device Type: 2H23-50R		Firmware Revision: XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
	Port 5		Port 6
Port Type	FE-100TX		Unknown
Link Status	Link		N/A
Current Oper. Mode	100Base-TXFD		[N/A]
Desired Oper. Mode	[Auto-Negotiation]		[N/A]
Advertised Ability	[100Base-TXFD]	[Disabled]	[N/A]
SAVE	EXIT
				RETURN

22861-24

Figure 5-20 High Speed Interface Configuration Screen

The following briefly defines each field of the High Speed Interface Configuration screen.

Port Type (Read-only)

Displays the type of interface (FE-100FX, FE-100TX, FE-100F3, or Unknown) installed in slots 5 and 6. Figure 5-20shows that there is an FE-100TX interface installed in slot 5 and no interface (indicated by Unknown) in slot 6.

Link Status (Read-only)

Indicates whether or not there is a physical connection from this port to another 10BASE-T or 100BASE-TX/FX device. One of the following values displays:

•Link – There is a link signal present and a valid physical connection to another device.

•No Link – There is no link signal present and no valid physical connection to another device.

5-48 2H23-50R/2H33-37R User’s Guide