Cabletron Systems 2H23-50R, 2H33-37R Setting the Device Time, Entering a New Screen Refresh Time

General Configuration Screen

5.7.6Setting the Device Time

To set the device time, perform the following steps:

1.Use the arrow keys to highlight the Device Time field.

2.Enter the time in this 24-hour format: HH:MM:SS

NOTE

When entering the time in the system time field, separators between hours, minutes, and seconds are not needed as long as each entry uses two numeric characters. For example, to set the time to 6:45 P.M., type “184500” in the Device Time field.

3.Press ENTER to set the system clock to the time in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the time entered is a valid format, the message displays “SAVED OK” at the top of the screen. If the entry is not valid, Local Management does not alter the current value and refreshes the Device Time field with the previous value.

5.7.7Entering a New Screen Refresh Time

The screen refresh time is set from 3 to 99 seconds with a default of 3 seconds. To set a new screen refresh time, perform the following steps:

1.Use the arrow keys to highlight the Screen Refresh Time field.

2.Enter a number from 3 to 99.

3.Press ENTER to set the refresh time to the time entered in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the time entered is within the 3 to 99 seconds range, the message “SAVED OK” displays at the top of the screen. If the entry is not valid, Local Management does not alter the current setting, but it does refresh the Screen Refresh Time field with the previous value.

2H23-50R/2H33-37R User’s Guide 5-25