CARTON CONTENTS
1.Extension table
2.Fence slide
3.Fence slide support
4.Dust bag
5.1/2" arbor and fence wrench
6.¼" hex wrench
7.7/16" open end wrench
8.Lock handle for slide fence
9.5/16" flat washer
10.5/16" lock washer
11.5/16"- 18 x 1 1/4" long hex head screw (2)
12.5/16" - 18 x 3/4" long hex head screws (2)
13.1/8" hex wrench
UNPACKING
1.Carefully remove the machine from the carton. Retain all packing materials until you have inspected and satisfactorily operated the machine.
DO NOT OPERATE THIS MACHINE UNTIL YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL.
Fig. 2
2 | 4 |
13
7
8
10
6 | 5 |
2.Place the machine on a firm, level surface with extra room for handling and proper support of the workpiece.
3.Familiarize yourself with all features and controls explained in this manual.
4.The machine is shipped with the cuttinghead locked in the down position and the table rotated to 45° left, Fig. 2. To release the head and move it to the operating position, see “MOVING CUTTINGHEAD TO THE UP POSITION” and “MOVING THE TABLE TO THE 0°
5.Unassembled items are shown in Fig. 3 for identification and use in assembling the saw.
11 9
Fig. 3
B
12 13
A
Fig. 4
ASSEMBLY
ASSEMBLY TOOLS REQUIRED
*1/2" arbor and fence wrench (supplied)
*1/4” hex wrench (supplied)
*Open end 7/16 wrench (supplied)
*1/8” hex wrench (supplied)
*5/16 socket wrench or adjustable wrench *Phillips head screw driver
*Framing square
*
ASSEMBLY TIME ESTIMATE
Assembly time for this product will be about 30 minutes to an hour.
8
