43
Raise decorative cover and twist clockwise until tight.
46
Plug white wire from fan to white wire from light kit. Then plug blue wire from fan to black wire from light kit.
49
Raise decorative cover and twist clockwise until tight.
52
Install 3 x 60 watt (E12) base bulbs.
44
Drop decorative cover ring over light kit.
47
Plug connector from fan to connector from switch housing.
50
Remove light rings and save.
53
Remove cover by snaping off from top or bottom. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.
45
Install switch housing to light kit. Install lockwasher and hex nut pro- vided and tighten securely.
48
Tighten switch housing screws.
51
Install glass to fitters and then install the light rings to hold glass in place.
54
Attach cover of remote by placing over buttons and snaping into place.
