19
Lift Canopy to ceiling aligning the key hole slots with the screws on the bottom of the Mounting bracket. Rotate the canopy Counter Clockwise to lock in place. Tighten the screws to secure the Canopy. See inset for Keyhole shape
22
Check the motor for plastic shipping stabilizer tabs, and remove them if they are present. The screws, washers, and motor pads are pre- installed to the blade holders. Attach blade assembly to motor and tighten screws securely.
25
20
Place floating brackets onto blades aligning holes in blade with the floating bracket.
23
Loosen 4 screws with slots and remove the other screw.
26
21
Place blade arms onto the other side of the blade and aligning holes. Insert screws with fabric washers though the holes and tighten securely.
24
Place fitter plate on screws and twist into place. Tighten the 4 screws with slots and replace the other screw.
Connect plug from fan to switch house plug.
Loosen 3 screws with slots and remove 2 with- out slot. Place switch housing over 3 screws and twist into place. Tighten the 3 screws with slots and replace and tighten the 2 removed.