Panasonic UB-8325 operating instructions Meanings of Error Codes, Indication Cause Remedy See

Troubleshooting

	The marker for interactive (small) is not securely set.
Detection of the marker color of	Rotate the pen holder lever to the release position, and then	25
	return the pen holder lever to the lock position while inserting
the Electronic Pen does not work
	the marker until you hear a buzzing sound.
well when the Whiteboard mode
	The proprietary marker for interactive (small) is not set into the pen
of the interactive function is used.
	holder.	82
	Use the proprietary markers for interactive (small).
The message "Low Battery"	Replace batteries of the Electronic Pen or the Electronic Eraser	25
appears on the computer screen.	which have “Low Battery” message displayed.	77

Meanings of Error Codes

The following table describes the meaning of each of the symbols which may flash in the Multi-Copy/Error Indicator.

Indication	Cause	Remedy	See
			Page
	Data transfer error	Connect the USB cable securely.	25
(Error)
	The screen will not move.	Turn off the power and slowly move	–
		the screen by hand.
(Screen)
	The printer door is not closed	Close the printer door securely.	19
	securely.
(door)
	Paper jam	Open the printer door and remove	23
		the jammed paper.
(Jam)
	The thermal transfer film is slack, has	Remove the slack from the thermal	18
		transfer film, replace or install the
	run out or is not installed.		22
(ribbon)		thermal transfer film.
	Out of paper	Load copy paper.	19
(Paper)
	The scanner or screen is in strong	Change the direction of the screen or	–
	sunlight or strong lighting.	block the light.
(Scanner Failure)

If other indications appear, call your dealer.

80