Using the Panaboard in Projector Mode
■Adjusting the Shifted Position
The Electronic Pen or Electronic Eraser position may largely shift by the using environment. In this case, adjust the position according to the following procedures to improve the shifted position.
1 
in the Taskbar and click Settings - Adjustment... in the
•The Adjustment window appears.
2 Place the Electronic Pen at the center of the Interactive Panaboard screen and drag slowly the Electronic Pen downward about 100mm (4”).
•When the adjustment is finished, the adjustment end message will be displayed in the Adjustment window and [Cancel] will be changed into [OK].
■Setting Options
Specifies the option of the Interactive Panaboard Software.
1 
in the Taskbar and click Settings - Options... in the
•The Options window appears. 2 The following options can be set.
3 Click [OK].
Note
•For precise adjusting, keep the Electronic Pen perpendicularly to the Interactive Panaboard screen during the adjustment. Inclined pen angle will cause the shift of position.
•To cancel the adjustment, click [Cancel] by a mouse of the computer.
•Show Desktop Drawing Tool when Projector Mode starts:
The Desktop Drawing Tool is automatically displayed after the Projector mode starts by checking the check box.
•Print out image automatically rotates to fit printer paper direction:
The printing image automatically rotates to fit the direction of paper set in the printer of the Interactive Panaboard by checking the check box.
•Original Keyboard:
The original keyboard of the Interactive Panaboard Software is used as the virtual keyboard. (See page 43.)
•Windows Keyboard:
The
*The Windows Keyboard can be used only with Windows Me, Windows 2000 or Windows XP.
36
