Panasonic UB-8325 operating instructions Using the Panasonic-DMS, Scanning

Using the Panasonic-DMS

Using the Panasonic-DMS

Scanning

You can scan images on the screen to your computer by operating Panasonic-DMS.

1	Click [Start], move the pointer to Programs–
	Panasonic–Panasonic Document
	Management System–Document Manager.
	(For Windows XP, All Programs instead of
	Programs.)
2	• The Panasonic-DMS software runs.
	Click the File menu, then click Select
3	Source....
	Select Panaboard UB-8 USB TWAIN Driver
4	and click [Select].
	Click the File menu, then click Acquire
	Image..., or click the	(scanner) icon on the
	Toolbar.

• The Panaboard Operation Panel appears.

Note

•If the Panasonic Interactive Software is started, the Panaboard Operation Panel cannot be displayed. Close the Panasonic Interactive Software and start it.

•When the Panaboard Operation Panel is not displayed, check the USB cable connection or the condition of the electronic board.

5 Click the (Scan) button or the (2-Screen Scan) button.

•Scanning starts and the scanned image will be displayed on the screen of the computer. It is also possible to start scanning using the (Copy Key) or (2-Screen Copy Key) on the electronic board.

6 Click [Close] on the Panaboard Operation Panel to finish scanning.

•About the Document Manager, refer to the Document Management System operating instructions in the CD-ROM.

Note

•Dragging the Panaboard Operation Panel using the mouse or activating other software programs during scanning may cause scanning troubles.

72