Morel ST-90, ST-95 Amplifier Connection, Caring for the SoundSpotTM Speakers, Stereo Models

Amplifier Connection

Unplug the electrical connection of the amplifier before making any connections.

For each speaker, connect the red or (+) output terminal on your amplifier to the red input terminal on the speaker and connect the black or (-) output terminal on the amplifier to the black input terminal on the speaker.

LARGE, SMALL Speaker Amplifier Setting

AC3, Dolby surround sound amplifiers have a speaker setting option for large or small speakers.

This setting option is made to protect small speakers by filtering low frequency signals, which may harm the speaker at high power out put.

The following setting is needed for your speakers: LI-1, BI-1set to small speaker option.

All other speakers can be set to large speaker option.

Stereo Models

The SoundSpotTM SA-2, SI-2 and BI-2 stereo models are designed for direct connection to your amplifier and do not require a filtered output.

Regardless of your speaker setting or your amplifier's rated power capacity, do not operate the speakers at full output levels (highest volume), as the high levels of distortion generated by amplifiers at full output may damage your speakers.

Caring for the SoundSpotTM Speakers

To protect the speaker components, avoid operating the speaker in extreme humidity or adverse temperature conditions.