Morel ST-95, ST-90 owner manual Connection Guidelines, VOLTAGE SELECTOR switch, AC outlet

7. VOLTAGE SELECTOR switch

Before operating, adjust the position of the voltage selector switch to 115V or 230V, according to the power supply in your country.

8. AC outlet

Power supplied through this outlet is turned on and off by the POWER switch.

Connection Guidelines

Before making connections it is advisable to ensure that all AC power cords of the components you are interconnecting are unplugged from the wall outlets during the hookup process.

Connection Through the Line-Level (RCA) Inputs

Use this connection option if your amplifier has a low frequency exit (LFE) subwoofer output, or pre-amp outputs (all AC3 or Dolby Surround amplifiers have such an output). Connect the two LFE (or PRE OUT) outputs (for left and right channels), to the two LINE IN inputs in your SoundSubTM, using an RCA (interconnect) cable pair.

If your amplifier has only a single subwoofer output, then connect this output from your amplifier to just one of the LINE IN inputs in your SoundSubTM.

Connection Through the High-Level (BINDING POST) Inputs Use this connection option if your amplifier does not have an LFE output (this is the case, for instance, if you are using a Prologic or hi-fi amplifier). Using a speaker cable: connect the red or (+) right speaker output terminal of your amplifier to the R+ terminal on your subwoofer, and connect the black or (- )right speaker output terminal on the amplifier to the R- terminal on the subwoofer. Repeat the process for the left speaker, connecting the red or (+) left speaker output terminal