44415 rev3 30/9/08 13:06 Page 1
Place the buns or other items onto the bun warmer. Set the browning control to the bun warmer position
‡. Depress the bread carriage lever until it holds down. Wait for the toaster to switch off automatically or press the cancel button to switch the toaster off before removing the buns.
WARNING: Take care not to touch the metal of the bun rack as this will be hot.
Do not put more than two buns on the bun warmer at any one time.
Crumb tray(s)
WARNING: Crumbs will accumulate in the crumb tray(s) and could catch fire if not emptied regularly.
When the appliance has cooled down completely, tap the sides of the case lightly to dislodge any crumbs lodged in the toasting chamber and remove the crumb tray(s) „. Empty the tray(s) and replace D.
D |
Never operate the appliance without the crumb tray(s) fitted.
CLEANING AND
MAINTENANCE
1After use and before cleaning, switch off at the mains, remove the plug from the wall socket and wait for the toaster to cool.
2Wipe the outside of the toaster with a damp cloth only and dry with another cloth or tissue.
•NEVER use metal polish or coarse scouring agents and never immerse your toaster in any sort of liquid.
•NEVER use any pointed or sharp articles for cleaning the inside, otherwise the heating element will be damaged.
•NEVER use a brush or push your fingers or metal objects down the slots.
•NEVER immerse your toaster in water.
HINTS AND TIPS
•In order to achieve uniform browning, we recommend you wait a minimum of 30 seconds between each toasting, so that the control can be automatically reset.
•If toasting one slice only, you may need to adjust the browning control to a slightly lower setting.
•Note: you will also notice a slight variation in toast colour on one side of a single slice.
•Stale bread toasts more rapidly than fresh bread. Therefore, the browning control should be set at a lower setting than usual.
•All sorts of bread can be used as well as teacakes, small rolls etc. However, slices should not be so thick as to cause burning or jamming within the bread slots.
•When toasting two or more items, it is recommended they are of equal size and freshness.
•Do not lift or move the toaster by inserting fingers into the bread slots.
•If the bread in your toaster becomes jammed, disconnect your toaster at the socket, allow it to cool, then remove the bread.
•Allow the toaster to cool fully before putting away.
TROUBLE
SHOOTING
•Has the toaster been set correctly - is the plug in it’s socket and the switch in the ‘on’ position?
•Is the plug itself or the socket faulty - check this by plugging in another appliance.
•Does the fuse need replacing - if you have fitted your own plug, are the internal plug connections secure and correctly made?
HELPLINE
If you have any difficulty with your appliance, do not hesitate to call us.
We are more likely to be able to help than the store from where you bought it.
Please have the following information ready to enable our staff to deal with your query quickly.
•Name of the product.
•Model number as shown on the underside of the appliance.
•Serial number as shown on underside of the appliance.
UK Helpline
0844 871 0957
Replacement Parts 0844 873 0723
Ireland Helpline 1800 409 119
|
|
5 | UK Helpline 0844 871 0957 Replacement Parts 0844 873 0723 Ireland Helpline 1800 409 119 |
