Morphy Richards 29118 REV2 STANDBY, CLOCK SETTING In the standby mode., TIMER SETTING

UUKK HHeellpplliinnee00887700 006600 22661144 IIrreellaanndd HHeellpplliinnee11880000 440099111199
77
STANDBY
11Press the power button on the
woofer cabinet, unit is in
standby mode.
22Press STANDBY button on the
CD unit (or remote) to switch the
unit on.
33Select the sound source (CD,
AUX, CARD-USB orTUNER) by
pressing FUNCTION button.
The corresponding display will
light up.
44Adjust the VOLUME with the
volume (UP or DOWN) button
55Set the preset equaliser (PASS,
CLASSIC, ROCK, POP, OR
JAZZ) with the EQ button on the
remote.
66Press STANDBY button again on
the CD to turn off the unit.
CLOCK SETTING
In the standby mode.
11Press and hold MEMORY/CLK-
ADJ. button until the time
displays 24-hour digit flashing.
22Press SEARCH/SKIP/TUNING
(DOWNor UP) button to adjust
12 hour or 24 hour digit.
33Press MEMORY/CLK-ADJ.
button again, the time display
HOUR digit flashes, press
SEARCH/SKIP/TUNING (DOWN
or UP) button to adjust HOUR
digit; Press MEMORY/CLK-ADJ
button once more, the MINUTE
digit flashes, adjust it by the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
44Press the MEMORY/CLK-ADJ
button again to confirm the
time.
55Each enable state as shown
above will be cleared if the key
is not pushed in 10 seconds.
66In the CD or TUNER mode.
Press and hold the
MEMORY/CLK-ADJ button a
few seconds. To check the
current time.
TIMER SETTING
(on the remote)
11After adjusting clock, press the
TIMER button for a few
seconds, ‘ON and 00:00’
appears on the display and the
HOUR digit flashes. D.
22Press the
SEARCH/SKIP/TUNING (UP or
DOWN) button to adjust it.
33Press the TIMER button again,
the MINUTE digit will start
flashing, adjust it by pressing
SEARCH/SKIP/TUNING (UP or
DOWN) button.
44Press the TIMER button once
more to confirm/order TIMER
ON time.
55After adjusting ‘TIMER ON’, ‘
OFF’ appears on the display and
the HOUR digit flashes. E
66Repeat the above steps 2 to 3,
then press the TIMER button
once more to confirm/order
TIMEROFF time.
77Now the TUNER or CD appears
on the display with flashing,
adjust ‘TUNING’ or ‘CD’ by
pressing the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
88Press the TIMER button again,
the timer ‘VOL 15’ indicator
appears on the display and
flashes, adjust the timer volume
high or low by the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
99Each enable state as shown
above will be cleared if the
button is not pushed in 10
seconds.
1100After adjusting ‘TIMER ON” and
‘TIMEROFF’, press the TIMER
button. ‘ ‘ appears on the
display.
1111The unit will be switched on
automatically at ‘TIMER ON’ and
start playing and the unit will be
switched off automatically at
‘TIMER OFF’.
Note: N.B Not available with
USB or SD.
D
E
29118 rev2 8/8/06 13:05 Page 8