99

wwwwww..mmoorrpphhyyrriicchhaarrddss..ccoomm

99

EQ CONTROL
(on the remote) F
EQ shows the present sound
tone.
When you press the EQ button
on the remote, the sound tone
changes.
TO SET SLEEP FUNCTION
(for remote handset) G
11If you want to fall asleep to
music, press SLEEP button on
the remote.
22You may adjust the Radio or CD
player sleep function to play
from 90, 80, 70, up to 10
minutes of music before shutting
itself off automatically.
FUNCTION SELECT
H
Pressing this button alters the
audio play out source. Display
changes as below.
ESP Function
This is the electronic shock
protection function prevents the
CD’ skipping’ if the system is
accidentally knocked during
play.
11In CD mode 40 sec.
22In MP3 mode 100 sec.
HINT: Please deselect the ESP
function if the disc play has an
poor effect on ESP condition.
RADIO OPERATION
Press the FUNCTION button to
the TUNER mode on the unit (or
remote control), you can select
the radio operation.
11Press the BAND button to select
wave band range appearing on
the display.
22Select the desired wave band
range with the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
Band select
To tune for a weak stations, use
manual tuning by pressing
SEARCH/SKIP/TUNING (UP or
DOWN) button continuously until
you read the correct frequency
or the reception at its best.
Mono/Stereo select
Only in FM mode.
11When you want to select FM
stereo station, press
MONO/ST./FIND/ESP button.
When you receive a FM stereo
station the “ ” indicator
will appear on the display, you
can receive FM stereo
tramission.
22When you press the
MONO/ST./FIND/ESP button
again, the FM STEREO indicator
will turn off and switch to
MONO FM status.
Automatic tuning
11Press the
SEARCH/SKIP/TUNING (UP or
DOWN) button for a second of
more, then release the button.
The tuner will automatically
search the first station of
sufficient signal strength.
22Repeat above procedure if you
wish to select another station.

88

wwwwww..mmoorrpphhyyrriicchhaarrddssaauuddiioo..ccoomm

F

H

G

29118 rev2 8/8/06 13:05 Page 9