Morphy Richards 4 slice polished chrome toaster manual Features of your toaster, Before first use

Features of your toaster

Crumb Tray

Set slice control switch

Cord storage

Electronic variable browning control

Cool touch handle

Cancel button with neon

Frozen bread button with neon

Re-heat button with neon

Bread carriage lever/high lift feature

Bread slots

Before first use

•Before using the toaster for the first time operate the toaster without bread with the

slice control switch set to and the browning control set to 8. Note: the bread

carriage lever will not stay down unless the toaster is plugged in and the wall switch is on. Ventilate the room during this period.

•As with all new electric heating elements, your toaster emits a ‘new’ smell when it is first switched on. This is quite normal and not a cause for concern.

Instructions for use

1Set the slice control switch according to the number of slices to be toasted,

for 1 or 2 slices for 3 or 4 slices. If both sides of one or two slices are required to be toasted then the bread must be placed in the bread slot as indicated on top of the toaster. If you require the bagels, buns or bread to be toasted on one side only set the switch to the and place

the bread in the bread slot. Only the

side of the bread facing the right hand bread slot will be toasted. Note that only two slices of one-sided toast can be made at a time.

2Select the desired level of browning on the

browning control marked 1 to 8. The

setting required will vary according to the moisture content and thickness of bread. For best results ensure that the bread

slices are of even thickness, freshness and size.

Remember that stale bread toasts more rapidly than fresh and thin bread toasts quicker than thick. See additional points for more information.

3After selecting the desired level, place

your bread in the slots and depress the

bread carriage lever downwards until it locks.

4After the set degree of browness

has been reached the bread will pop-up automatically ready for removal from the slots.The bread carriage lever will have returned to its upper position and the heating element will have switched off, ready for the next toasting.

•Note : that the toast can be made slightly darker by using the re-heat function.

•If the bread in your toaster becomes jammed disconnect your toaster at the socket, allow it to cool, then remove the bread.

•When not in use, switch your toaster off at the mains and remove the plug from the socket. DO NOT WRAP THE CABLE AROUND THE MAIN BODY OF THE APPLIANCE DURING OR AFTER USE.

Using the cancel setting

When the bread carriage lever is

depressed, the cancel button will illuminate. If you wish to interrupt the toasting process, press the cancel button.

Using the frozen bread button

To toast frozen bread, do not adjust the browning control, place the bread normally in the bread slots, depress the bread carriage lever and press the frozen bread button . The button will illuminate and the toaster will automatically toast for an extended period.

3