STORING YOUR AREA CODE
You can store your local area code in the phone’s Caller ID record so it does not show the area code if the received call is from your local area.
Note: If your calling area requires
Follow these steps to store your area code.
1.Lift the handset and press MUTE/PGM.
7H;7ý9E:; appears.
2.Enter your
3.Press MUTE/PGM twice to exit.
SETTING THE RINGER LEVEL
You can select high or low ringer volume, or turn the ringer off.
1.Lift the handset and press MUTE/PGM twice. H?D=ýB;L;B appears with the cursor pointing to the current setting.
2.Press 6/∗/TONE or #/7 to move the cursor to the desired setting (>?, BE, or
E<<).
3.Press MUTE/PGM.
Note: When you select E<<, H_d][hý E\\ appears and the phone beeps. You can still make or receive a call. When you
have an incoming call, the phone con- nected to the same line rings, and H_d]# _d] appears (then Caller ID information, if you subscribe to the service).
USING THE BELT CLIP
To attach the belt clip, align the clip with the slots on the sides of the handset, then snap it into place.
To remove the belt clip, use a flat object such as a table knife to pry the belt clip off the phone.
Installation | 9 |