Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID

Models: 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID

1 16
Download 16 pages 56.51 Kb
Page 4
Image 4
BATTERY SAFETY

8.To reduce the risk of electric shock, do not disassemble this product. If servic- ing is required, take it to a qualified ser- viceman.

9.Disconnect this product from the tele- phone line and refer to qualified service personnel under the following condi- tions.

If liquid has been spilled into the prod- uct.

If the product has been exposed to rain or water.

If the product has been dropped or the cabinet has been damaged.

If the product exhibits a distinct change in performance.

If the product does not operate normally by following the operating instructions. Adjust only those controls that are cov- ered by the operating instructions. Improper adjustment of controls may result in damage and require extensive work by a qualified technician to restore the product to normal operation.

10.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.

11.Do not use the telephone to report a gas leak in the vicinity of the leak.

BATTERY SAFETY

INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY, READ AND FOLLOW THESE INSTRUCTIONS.

1.Do not dispose of the battery pack in a fire. The cell may explode. Check with

local codes for possible special disposal instructions.

2.Use only a replacement battery pack of the required size and type. Use only a 3.6V 600mAh Nickel Metal Hydride (Ni- MH) battery pack.

3.Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

4.Exercise care in handling the battery pack in order not to short the battery with conductors such as rings, brace- lets, and keys. The battery pack or con- ductor may overheat and cause burns.

5.Do not attempt to recharge the battery pack provided with or identified for use with this product by heating them. The battery pack may leak corrosive electro- lyte or may explode.

6.Do not attempt to rejuvenate the battery pack provided with or identified for use with this product by heating it. The bat- tery pack may release electrolyte, caus- ing burns or irritation to eyes or skin.

7.When inserting the battery pack into this product, the proper placement must be observed. Reverse insertion of the bat- tery pack can cause charging, and that may result in leakage or explosion.

8.Remove the battery pack from this prod- uct if the product will not be used for a long period of time (several months or more) since during this time the battery pack could leak in the product.

9.Discard a dead battery pack as soon as possible since dead batteries are more likely to leak in a product.

10.Do not store this product, or the battery pack provided with or identified for use

4

Read This Before Installation

Page 4
Image 4
Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID Battery Safety Instructions