Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID Dm0ýNN

you scroll past the last record, ;dZýe\ýB_ij ap- pears, then the first record. When you scroll past the first record, ;dZýe\ýB_ij appears, then the last record.

The top line of each record shows the time, date, and the number of calls from that num- ber. The second line shows the caller’s phone number, and the third line shows the caller’s name.

To exit the Caller ID record display, press TALK twice, or return the handset to the base.

Caller ID Messages

Display	Description
JejWb0NN	Shows the number of new
D[m0ýNN	Caller ID records (records
	you have not reviewed)
	and the total number of
	records.
	Note: If you have set the
	ringer off, only the number
	of new records appears.
Fh_lWj[ýDWc[ýor	The caller has blocked the
Fh_lWj[ýDe$	Caller ID information.
KdademdýDWc[ýor	The caller is not within a
KdademdýDe$	Caller ID service area.
:WjWý;hheh	Appears if there was an
	error during the transmis-
	sion of Caller ID informa-
	tion. Occasional errors are
	normal. If the phone fre-
	quently displays :WjWý
	;hheh, contact your local
	telephone company or
	RadioShack store.

ADDING/DELETING THE AREA CODE

When the area code of the received call is the same as the one you stored (see “Storing Your Area Code” on Page 9), the caller ID record does not show the area code. If it is

different, the record shows the area code. However, you can add or delete the area code on the display. When the record is on the display, press 3 to add or delete the area code. Pressing 3 again deletes or adds the area code.

DIALING NUMBERS FROM A CALLER ID RECORD

To dial a local number stored in a Caller ID record, recall the record, then press TALK. If it is a long distance call, press 1 (' appears before the displayed number) before you press TALK. If you want to add or delete the area code, press 3 before you press TALK.

Note: If a Caller ID record does not contain a phone number (if it was blocked by the caller, for example), you cannot dial from that record.

STORING A CALLER ID RECORD IN MEMORY

1.Press 8 or 9 to recall the record you want to store.

If you want to add or delete the area code, press 3.

2.Press MEM. C;CEHO appears.

3.Choose a memory location (0–9) by

pressing a number or by repeatedly pressing 8 or 9.

;cfjo appears if the location does not contain a number. The current contents of the location appear if it does contain a number. Check to be sure that you want to overwrite the current contents.

4.Press MEM. The phone beeps to confirm that it stored the number, then the total number of Caller ID records appears.

14 Caller ID Operation