ˆInstallation
MOUNTING THE PHONE
Select a flat surface that is:
•near an AC outlet
•near a telephone line jack
•out of the way of normal activities
•away from electrical machinery, electri- cal appliances, metal walls or filing cabi- nets, wireless intercoms, alarms, and room monitors
•away from other cordless phones
The base’s location affects the handset’s range. If you have a choice of several loca- tions, try each to see which provides the best performance.
Cautions:
You must use a Class 2 power
!source that supplies 9V DC and delivers at least 300 mA.
Its center tip must be set to positive and its plug must fit the phone's
mA jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.
•Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you dis- connect it from the phone.
Your telephone connects directly to a modu- lar telephone line jack. If your telephone wir- ing does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store), or have the telephone company up-
date the wiring for you. You must use com- patible modular jacks that are compliant with Part 68 of FCC Rules.
Note: The USOC number of the jack to be installed is RJ11C (or RJ11W for a wall plate jack).
Follow these steps to set up your phone.
1.Plug one end of the supplied modular cord into the TEL jack on the back of the base.
2.Insert the supplied AC adapter’s barrel plug into the DC 9V 300 mA jack on the back of the base.
3.Plug the modular cord’s other end into the phone jack.
4.Route the adapter cord through the strain relief slot on the base then plug the adapter into a standard AC outlet.
5.Lift the base’s antenna to a vertical posi- tion.
CONNECTING, CHARGING, AND REPLACING THE BATTERY PACK
The phone comes with a rechargeable
1.Press down and slide off the battery pack compartment cover.
2.Lift the battery pack out of the compart- ment.
3.Plug the battery pack's connector into the socket in the compartment, (the con-
Installation | 7 |