ˆOperation
A QUICK LOOK AT YOUR PHONE
MUTE/PGM — Press to talk to someone in the room while using the phone without the person on the other end of the phone line
hearing your conversation. CKJ; appears on the display.
Press again to resume your phone conversation.
REDIAL/PAUSE — You can quickly dial the last number you dialed. Lift the handset and press TALK then REDIAL/PAUSE. The phone dials the number. Notes:
• You can press REDIAL/PAUSE first then press TALK to dial the number in redial memory.
• Redial memory holds up to 32 digits, for
redialing
• Redial memory also holds pause entries.
6/∗/TONE — Some special servic- es, such as
Be sure
PULSE.
Dial the service’s main number. When the service answers, press
6/∗/TONE. Any additional num- bers you dial are sent as tone signals. The phone automatically resets to the pulse mode the next time you make or receive a call.
TALK — To make a call, lift the hand- set and press TALK. J7BA appears, and the IN USE/PAGE indicator on the base lights. Enter the number. The number appears as you dial, then (after a few seconds) the call’s elapsed time appears.
You can also enter the number before you press TALK. If you make a mis- take, repeatedly press DELETE until the incorrect entry is erased. Then en- ter the correct number. Press TALK to dial the number. The IN USE/PAGE in- dicator on the base lights. The number you entered and the call’s elapsed time appear.
When you receive a call, H_d]_d] ap-
pears. To answer, lift the handset from the base and press TALK. J7BA ap-
pears.
To end a call, press TALK or place the handset on the base.
FLASH — Performs the electronic equivalent of a switchhook operation for special services, such as Call Wait- ing.
For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.
10 | Operation |