2.Replace hydraulic oil after first 200 hours and in every 1,000 hours of operation.

CAUTION :

Make sure hydraulic oil i is at a normal safe operating level.DO NOT over fill.Over filling (excessive oil) will cause excess oil to blow out of breather plug.

Replacing Hydraulic Oil

1.Remove the drain plug (Figure 28) at the bottom of the oil tank with a 6 mm hex wrench and drain the hydraulic oil.

Figure 28. Hydraulic Oil Maintenance

2.Clean the filter with light oil.

3.Reinstall the drain plug to the oil tank. Apply seal tape or Roctite #575 to thread portion.

4.Fill tank with hydraulic oil. (Capacity: About 2,500 cc). Use ShellTellus Oil #46 or equivalent.

5.After filling tank, temporarily install cover. Loosen bleeder plug located at the top of the cylinders on side of vibrator (Figure 27). Air remaining in the circuit will be forced out of the bleeder plug.

6.Tighten the breather plug. Check oil level in the tank again.

7.Install the cover of oil tank. Coat packing with liquid packing such as Threebond #1215. Use Loctite #242 for mounting screw.

MVH-402GHB — MAINTENANCE

Battery Maitenance

1.Check the battery terminals periodically to ensure that they are in good condition.

2.Use wire brush or sand paper to clean the battery terminals.

3.Check battery for cracks or any other damage. If white pattern appears inside the battery or paste has accumulated at the bottom, replace the battery.

4..If the machine will not be in operation for a long period of time, store in cool dry place and check the battery charge level every month to maintain the performance of the battery.

Battery Cable Connection

1.Take off the battery cover by removing the M6 nuts (Figure 29).

2.When removing cable, disconnect the ground side (normally negative) first (Figure 29).

3.When installing cable connect the ground side (normally negative) last.

Figure 29. Battery Maintenance

CAUTION :

Wear safety glasses or face mask, protective clothes, and rubber gloves when working with battery.

MQ-MIKASA MVH-402GHB PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (12/17/03) — PAGE 23

Page 23
Image 23
Multiquip MVH-402GHB manual Replacing Hydraulic Oil, Battery Maitenance, Battery Cable Connection

MVH-402GHB specifications

The Multiquip MVH-402GHB is a state-of-the-art vibratory plate compactor designed for optimal performance in various compaction applications. Known for its robust build and high efficiency, this piece of equipment is ideal for landscaping, road construction, and site preparation tasks. The MVH-402GHB is engineered to deliver outstanding results, making it a reliable choice for both contractors and DIY enthusiasts.

One of the standout features of the MVH-402GHB is its powerful Honda engine. This reliable 4-stroke engine delivers excellent performance while ensuring low fuel consumption and reduced emissions. The efficient engine allows for prolonged operation without frequent refueling, which is a significant advantage on larger job sites.

In terms of performance, the MVH-402GHB boasts a compaction force of up to 4,500 pounds, making it capable of compacting various materials including soils, gravel, and asphalt. Its operating weight of around 220 pounds provides balance and stability during operation, allowing for efficient maneuverability even in tighter spaces. The unit can reach a travel speed of approximately 80 feet per minute, enabling operators to cover larger areas more effectively.

The MVH-402GHB features advanced technology that enhances its usability. The integrated water tank allows for better dust control and cooling of the plate, ensuring that the surface remains moist for optimal compaction without damaging the material. Additionally, the compactor's ergonomic design includes a foldable handle, making it easy to transport and store. This focus on user-friendliness is complemented by a vibration-dampening design, which minimizes operator fatigue during extended use.

The construction of the Multiquip MVH-402GHB emphasizes durability and longevity. It is built with heavy-gauge steel and features a reinforced frame, ensuring it can withstand the rigors of daily use. The base plate is designed for maximum contact with the surface, further enhancing compaction efficiency.

In summary, the Multiquip MVH-402GHB is a top-tier vibratory plate compactor that combines power, efficiency, and user comfort. Its Honda engine, impressive compaction force, and thoughtful design features make it an essential tool for professionals and enthusiasts alike. Whether you are working on a small landscaping project or a larger construction site, the MVH-402GHB delivers reliable and high-quality compaction results.