CAUTION :

Never operate the compactor in a confined area or enclosed structure that does not provide ample free flow of air.

ALWAYS wear approved eye and hearing protection before operating the compactor.

Before Starting

1.Read safety instructions at the beginning of manual.

2.Familiarize yourself with the operating and control elements of the machine

and the working environment.This includes obstacles in the working area, bearing capacity of the ground and the necessary safety provisions.

3.Check the air filter for dirt and dust. If the air filter is dirty, replace air filter with a new one as required.

4.Check fastening nuts and bolts for tightness. Loose threads may cause damage to the machine when vibrating.

5. Understand the geographical features and regulations of the job site.

6.Clean the compactor, removing dirt and dust, particularly, the bottom of the plate, engine cooling air inlet.

Checking Engine Oil Level

1.Make sure that the machine is situated in a flat surface so that level measurements will be accurate.

2.Pull out the dipstick from the oil tank (Figure 5).

CAUTION :

DO NOT overfill oil tank.This could cause oil leaks and sluggish operation. Clean cap and surrounding area before opening to prevent dirt from entering tank.

ENGINE OIL

DIPSTICK

ENGINE OIL

FILLER HOLE

Figure 5. Oil Dipstick Removal

MVH-402GHBPRE-INSPECTION

3.If the oil level is low, fill to the edge of the oil filler hole with the recommended oil type (Table 4). Maximum oil capacity is 1.74 quarts (1.65 liters).

Table 4. Oil Type

Season

Temperature

Oil Type

 

 

 

Summer

(25°C or Higher)

SAE 10W-30

 

 

 

Spring/Fall

(25°C~10°C)

SAE 10W-30/20

 

 

 

Winter

Lower than10°C

SAE 10W-10

 

 

 

Explosive Fuel

DANGER

Diesel fuel is highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling.DO NOT attempt to refuel the compactor if the engine is hot! or running.

Checking The Fuel

1.Remove the fuel cap located on top of fuel tank.

2.Visually inspect to see if fuel level is low. If fuel is low, replenish with unleaded fuel (Figure 6).

3.Whenrefueling, besuretouseastrainerforfiltration.DONOT top-off fuel.Wipe up any spilled fuel.

Figure 6. Refueling

DANGER

Fuel spillage on a hot engine can case a fire or explosion. If fuel spillage occurs, wipe up the spilled fuel completely to prevent fire haz- ards. NEVER smoke around or near the compactor.

PAGE 16 — MQ-MIKASA MVH-402GHB PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (12/17/03)

Page 16
Image 16
Multiquip manual MVH-402GHB PRE-INSPECTION, Before Starting, Checking Engine Oil Level, Checking The Fuel

MVH-402GHB specifications

The Multiquip MVH-402GHB is a state-of-the-art vibratory plate compactor designed for optimal performance in various compaction applications. Known for its robust build and high efficiency, this piece of equipment is ideal for landscaping, road construction, and site preparation tasks. The MVH-402GHB is engineered to deliver outstanding results, making it a reliable choice for both contractors and DIY enthusiasts.

One of the standout features of the MVH-402GHB is its powerful Honda engine. This reliable 4-stroke engine delivers excellent performance while ensuring low fuel consumption and reduced emissions. The efficient engine allows for prolonged operation without frequent refueling, which is a significant advantage on larger job sites.

In terms of performance, the MVH-402GHB boasts a compaction force of up to 4,500 pounds, making it capable of compacting various materials including soils, gravel, and asphalt. Its operating weight of around 220 pounds provides balance and stability during operation, allowing for efficient maneuverability even in tighter spaces. The unit can reach a travel speed of approximately 80 feet per minute, enabling operators to cover larger areas more effectively.

The MVH-402GHB features advanced technology that enhances its usability. The integrated water tank allows for better dust control and cooling of the plate, ensuring that the surface remains moist for optimal compaction without damaging the material. Additionally, the compactor's ergonomic design includes a foldable handle, making it easy to transport and store. This focus on user-friendliness is complemented by a vibration-dampening design, which minimizes operator fatigue during extended use.

The construction of the Multiquip MVH-402GHB emphasizes durability and longevity. It is built with heavy-gauge steel and features a reinforced frame, ensuring it can withstand the rigors of daily use. The base plate is designed for maximum contact with the surface, further enhancing compaction efficiency.

In summary, the Multiquip MVH-402GHB is a top-tier vibratory plate compactor that combines power, efficiency, and user comfort. Its Honda engine, impressive compaction force, and thoughtful design features make it an essential tool for professionals and enthusiasts alike. Whether you are working on a small landscaping project or a larger construction site, the MVH-402GHB delivers reliable and high-quality compaction results.