![Hot water drinks](/images/new-backgrounds/62129/6212913x1.webp)
47507 Rev 1 5/4/05 4:02 PM Page 7
Hot water drinks
You may want to top up your espresso with hot water for a longer drink or to make other hot water drinks such as tea or instant soups using the steam nozzle.
1Ensure the unit is cold before removing the froth attachment from the steam nozzle.
2Press the steam/hot water button. ‹
The display shows the icon flashing.
3Follow the 'steam function' instruction, push the lever up to the steam/hot water
function R.
Note: You will hear the machine making a pumping noise, this is normal.
4The symbol will show on the digital display as water is dispensed through the steam nozzle.
5Once the water has reached the desired level, push the lever down to the off
position.
Note: It is normal for the symbols on the display to cycle on and off during the water heat up process.
Preheating coffee maker
To make hotter coffee and to warm your coffee cups you may preheat your machine. This can be achieved by following the 'espresso operation' by passing hot water through the coffee maker but without using coffee.
Cups should be placed upside down on the warming plate. Please note that this may take up to 20 minutes depending upon the type of cup used.
Cleaning and maintenance
You must clean the steam nozzle and froth attachment immediately after each use.
1Simply wipe the steam nozzle, warming plate and exterior with a clean, damp cloth. Do not use any abrasives or metal scourers as this will damage the finish
on the unit.
Briefly push the lever to the steam
setting to clear any remaining milk out of the steam nozzle.
WARNING: Steam from the nozzle is extremely hot and can scald.
2Place the froth attachment under warm running water to remove excess milk. IMPORTANT: Never wash your coffee
machine accessories in a dishwasher.
3The filters, filter holder and water reservoir should be washed after each use by rinsing them under water. To assist in keeping the filters clean we recommend you periodically run the machine with the filter in place, without coffee, using water only.
Should the holes in the filters become blocked with coffee granules use a fine bristled brush.
When your coffee maker is not being
used, we recommend that you do not leave the filter holder attached to the machine as this will reduce the life of the gasket.
7