47507 Rev 1 5/4/05 4:02 PM Page 8
Descaling
•If you live in a hard water area, we recommend that your coffee maker is descaled at regular intervals, e.g. every
•If the water filters through more slowly than usual, it is a sign that descaling is necessary.
•We recommend you use proprietary liquid descaler which is especially made for coffee makers and plastic kettles. Follow the instructions on the bottle or sachet, and then operate the coffee maker with just water 3 times before making coffee.
•Do not use kettle descaler unless the packet specifically states it it suitable for coffee makers.
Note: The permanent filters should not be used during descaling.
Drip tray
1The water level indicator · appears through the grid to indicate that the drip tray is full.
2Remove the grid of the drip tray by placing fingers in the two holes in the centre of the drip tray and lift off. S This must be done regularly or as soon as the red water level indicator appears through the grid.
3Lift the front of the drip tray up and slide it out. T
4Lift off the plastic lining of the drip tray. U Clean the drip tray and its grid with water and a little washing up liquid, rinse and dry.
5Reverse the procedure to reassemble. Note: Ensure that when you are
replacing the drip tray that the plastic lining is in the correct position.
S |
U |
T |
8
