Morphy Richards KT43024 manual Descaling

Models: KT43024

1 6
Download 6 pages 5.92 Kb
Page 6
Image 6
Descaling

43024 rev2:43024 21/10/2009 13:14 Page 6

 

 

 

 

 

Descaling

 

 

 

 

 

IMPORTANT: As this kettle

 

 

 

 

 

 

is fitted with a concealed

 

 

 

 

 

 

element it must be

 

 

¤

 

 

descaled regularly. The

 

 

 

 

 

frequency of descaling

 

 

 

 

 

 

 

 

 

 

depends on usage and the

 

 

 

 

 

 

 

 

 

 

 

 

hardness of the water in

 

 

 

 

 

 

your area.

 

 

 

 

 

 

Excessive scale can cause

 

 

 

 

 

 

the kettle to switch off

 

 

 

 

 

 

before boiling and may

 

 

 

 

 

 

damage the element

 

 

 

 

 

invalidating the warranty.

 

 

 

 

 

 

 

 

 

 

 

 

It is essential that regular

 

 

 

 

 

 

descaling takes place.

 

 

·

 

 

 

Remove hard scale using a

 

 

 

 

proprietary descaling

 

 

 

 

 

 

 

 

 

 

 

product suitable for

 

 

 

 

 

 

stainless steel kettles.

 

 

 

 

 

 

Alternatively use citric acid

 

 

 

 

 

 

crystals (available from

 

 

 

 

 

 

most pharmacies) as

 

 

 

 

follows.

 

 

 

 

 

 

 

 

 

 

 

1 Fill the kettle 3/4 full, boil,

 

 

 

 

 

 

then unplug the kettle

 

 

 

 

 

(remove the cordless kettle

 

 

 

 

 

 

from the base unit) and

 

 

 

 

 

 

stand it in an empty sink or

• The 360° connector allows

• If you do not put in enough

 

bowl.

the kettle to be located at

 

water, or switch on the

2 Add 50gm of citric acid

any position. - ideal for left

 

kettle when it is empty, the

and right handed users and

 

safety cut-out will switch

 

crystals to the water

for convenient positioning

 

off the power automatically.

 

gradually, then leave the

on the worktop.

 

If this happens, refill and

 

kettle to stand. Do not use

3 Plug in and switch on at

 

wait a few minutes for the

 

a more concentrated

 

element to cool, then use

 

solution.

the wall socket.

 

as normal.

 

 

 

 

4Switch the kettle on.

5 When the water boils the

kettle will switch off

3 As soon as the

effervescence subsides,

Filter removal empty the kettle and rinse it thoroughly with cold water.

1Open the lid.

automatically.

If you are using the kettle for the first time, pour away the boiled water and refill.

6Lift the kettle from the base unit by the handle ensuring you hold the kettle level.

To re-boil, switch to ON again. If the kettle has just switched off wait a minute or so before switching it back on again.

2Lift the filter upwards from its holder.

3To refit the filter, slide it into the side wall guides of the filter holder until it clicks into place.

WARNING: Unless the filter is fitted correctly, the kettle lid may not close and lock securely.

4Wipe the outside of the kettle thoroughly with a damp cloth to remove all traces of acid which may damage the finish.

IMPORTANT: Ensure that the electrical connections are completely dry before using the kettle.

 

4

UK Helpline 0844 871 0954 Replacement Parts 0844 873 0720 Ireland Helpline 1800 409 119

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 6
Image 6
Morphy Richards KT43024 manual Descaling