73322 Rev 2 17/1/05 2:42 PM Page 5
•Push the required attachment firmly onto the end of the hose.
•If additional length is required, attach one or both extension tubes.
6Switch on/off.
•IMPORTANT: Always fix the hose clip ˜ to the main body slot Ë when using the hose and tools.
•Never over extend the hose such that the cleaner is pulled over.
IMPORTANT: Turning the cleaner
sideways helps prevent the cleaner being pulled along by the stretch hose.
Using & cleaning turbo nozzle
Attach the turbo nozzle to the hose end for use on upholstery and stairs.
After use your turbo nozzle may become clogged. Turn over the nozzle and pull away any hairs or fibres. If they are tightly wound around the brush carefully snip the fibres with scissors, being careful not to damage the brush bar, pull away from the brush bar and dispose.
Emptying
Empty the dust canister regularly even if it does not look full this will maintain the performance.
1Remove the front cover by lifting the cover release lever. E
2
3Take the canister to the dustbin.
4Turn the lid 1/4 turn
5Lift out the central mesh filter Ô from the dust canister G. Brush clean if necessary.
6Empty out the dust canister Ó.
7
8 Shake the pleated filter to remove all dust.
9
canister and turn lid 1/4 turn clockwise to lock.
F
Ì
ÏÔ
Ó
Safety cut-out
If the cleaner overheats a motor protection thermostat will automatically switch the motor off. If this happens, switch the cleaner off, unplug from the power supply and leave the cleaner to cool for at least 30 minutes. Check the airways for blockages, empty dust canister and clean the filters before restarting.
E
Î
¤
‹ | |
|
5