Honeywell F50F Before You Call For Service, Electronic air cleaner doesnt seem to be working

BEFORE YOU CALL FOR SERVICE

IF…

Electronic air cleaner doesn't seem to be working

Arcing (snapping) seems too frequent

If your air cleaner is equipped with the optional W8600F Air Cleaner Monitor, the SERVICE and FAULT indicator on the W8600F will remind you that a cell and prefilter washing is due and tell you when the system isn’t operating properly. Whether or not your air cleaner has an Air Cleaner Monitor, perform these checks before you call your heating and air conditioning dealer for service.

THEN…

1.Make sure the furnace or air conditioner blower is running.

2.Make sure the access door is firmly closed and latched. If door is not closed properly, an interlock keeps the air cleaner off.

3.Press the test button. A snapping sound indicates the air cleaner is operating properly. If there is no snapping sound, make sure the appropriate fuse or circuit breaker is OK.

1.If the electronic cell(s) are wet from washing, turn the air cleaner off for 2-3 hours.

2.Check the cell(s) for broken ionizer wires or bent plates. Repair if necessary.

3.Wash cell(s) and prefilter(s) if dirty.

Neon light on the air cleaner does not come on

1.Make sure the furnace or air conditioner fan is running.

2.Make sure the access door is firmly closed.

3.Make sure the ON-OFF switch is in the ON position.

4.If the electronic cell(s) are wet, check again in 2 to 3 hours.

69-0756B—2 18