OPERATING YOUR ELECTRONIC AIR CLEANER
M3584 |
M3586 |
Set the
NOTE: Depress 1 for ON, 0 for OFF.
The air cleaner will now operate whenever your furnace/air conditioning system fan operates. For maximum air cleaning benefit and cleaner air conditioner coils, leave the air cleaner switch ON at all times and the fan switch on your thermostat ON. Of course, continuous fan operation will add to your electric bill each month.
When the fan and air cleaner come on, the neon indicator lights.
ON
BATTERY
SERVICE
FAULT
Air Cleaner Monitor
M11980 |
M 6032 |
M3585 |
ON
BATTERY
SERVICE
FAULT
Air Cleaner Monitor
If your air cleaner is equipped with a wall- mounted W8600F Air Cleaner Monitor (see page 2), the ON indicator will be active whenever the air cleaner is in operation. Of course, the system fan will also be running.
You may hear a snapping (electrical arcing) sound occasionally as the air cleaner operates. This usually is caused by a larger dust particle causing a high voltage discharge. The snapping sound means that your air cleaner is working as it should. To hear the snapping sound, momentarily press the test button near the bottom of the door. Use the test button any time you want to prove air cleaner operation.
When the fan and air cleaner stops, the neon light goes out, as does the ON indicator on the W8600F. The air cleaner is off until the heating or air conditioning and fan start again.
M11981
3 |
