Toshiba RAS-10JKCVP Care and cleaning, continued, Test run after care and cleaning, to Automatic

Models: RAS-10JKCVP

1 76
Download 76 pages 35.06 Kb
Page 31
Image 31
Test run after care and cleaning

Care and cleaning

(continued)

Test run after care and cleaning

Turn on power supply after cleaning the air filter, dust box and brush unit then perform a test run.

1

(Blue) (Orange)

Approx.

 

 

1 second

 

 

 

 

Until it switches

 

 

to Automatic

 

 

operation

2Press to Automatic again for approx. 1 second

Automatic operation stops.

3Close the front panel (Check that it is closed)

If the front panel is open, the air filter may not function correctly.

4Press CHECK on the remote controller for 10 seconds or longer

is displayed in the remote controller display for approx 2 seconds.

Operation of the air filter is checked automatically for approx. 3 minutes.

<Display portion of indoor unit>

(Blue) (Orange)

Illuminated in sequence

5Check the lamp in the Indoor unit display

All lamps are turn off for normal.

DUST BOX and TIMER lamp blink. It may be a fault with the air filter setting.

Press operation to turn off the lamp.

Perform removal and assembling of the air filter again. 2Press  again for approx. 1 second Page 30

Return to 4 after setting and check that the filter cleaning functions normally.

When not used for a long time

1Turns off power supply.

2Remove the batteries from the remote controller

If left inserted, they may cause a leakage of battery fluid or power discharge.

When restarting for use

1Check that the indoor unit and outdoor unit are clear

If blocked, performance may be impaired or may not function.

2Insert new batteries into the remote controller and set the year, month, day and

time 3Close the front panel (Check that it is closed) Page 9

3Turns on power supply.

31

1110650159_(31-38)_EN.indd 31

2/28/11 2:11 PM

Page 31
Image 31
Toshiba RAS-10JKCVP Care and cleaning, continued, Test run after care and cleaning, 2Press again for approx. 1 second