Toshiba RAS-10JKCVP Indoor unit, Check transmitting and receiving, How to operate, Pure

Models: RAS-10JKCVP

1 76
Download 76 pages 35.06 Kb
Page 10
Image 10
How to operate

How to operate

Indoor unit

Turn on the main power supply

It takes 3 to 8 minutes for the preparation of operation after the power supply is on. During this period, the operation lamp illuminates. However the operation does not start.

More conveniently Care and cleaning When troubled or when necessary

10

Check transmitting and receiving

Point the remote controller at the infrared signal receiver on the indoor unit.

Indoor unit PURE

Correct signal is confirmed by the receiving tone and the operation lamp illuminates.

When Turn on the main power supply button is pressed, receiving tone sound and the operation stops.

The receiving and

transmitting distance. Approx. 7m from straight in front of the main unit.

Check that the signal is transmitted and received at the installed position if the remote controller is fixed to the remote controller holder.

Notes

Use the remote controller where the indoor unit can receive the signal. It does not work if the signal is obstructed by curtains or sliding doors.

The distance for transmitting and receiving is shorter if a bright light such as sunlight affect the transmitting and receiving portion of the main unit.

The distance for transmission and receiving is shorter if the remote controller is operated from an oblique direction of the main unit.

1110650159_(02-10)_EN.indd 10

2/28/11 2:09 PM

Page 10
Image 10
Toshiba RAS-10JKCVP Indoor unit, Check transmitting and receiving, How to operate, Turn on the main power supply, Pure