Mosquito Magnet Defender manual Assembly Instructions, Important Notes

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

IMPORTANT NOTES:

1.Your trap will begin capturing immediately, but allow 4-6 weeks to interrupt the breed- ing cycle.

2.DO NOT MOVE MOSQUITO MAGNET WITH TANK AT- TACHED. DISCONNECT TANK FROM REGULATOR BEFORE RELOCATING TRAP TO AVOID DAMAGE TO REGULATOR OR TRAP.

3.Should you experience an interruption of power, be sure to restart trap.

4.Trap can be left running in the rain.

1

2

3

Place base upside down on a flat surface, slide U- shaped support legs into slots on base until they lock in place.

Turn base and leg assembly right-side-up and place support pole into cavity on base.

Place Defender power head onto pole. Press down firmly with two hands to secure.

5	Peel cover from attractant
	cartridge. Using a coin,
	unscrew cover from attrac-
	tant compartment inside of
	CO2 tube.

6	Slide attractant cartridge
	into compartment. Recap
	and secure tightly.

7	Place propane tank onto
	base into the molded cradle
	supplied.

4	Completed assembly should
	have the front of power
	head in the same direction
	as base U-shaped legs.

8	Making sure propane tank
	is fully closed, attach pro-
	pane regulator hose to
	propane tank. Secure tightly
	by hand. Do not use tools.

7

8