Motorola 2108-D9/N9 Support, Wall Mounting instructions optional, Mark the mounting holes

Support

Answers to many frequently asked product-related questions, as well as full product documen- tation with advanced configuration instructions, are also available on-line at:

http://broadband.motorola.com/consumers/support/default.asp?supportSection=blank

Note the serial number (SN:) of your Gateway. It is located on the label on the bottom of the Gateway below the model number. You will need the Gateway’s serial number if you need to call for technical support.

ENGLISH

Wall Mounting instructions (optional)

1.Hold a blank sheet of paper against the side of the Gateway with the mounting slots.

2.With a pen or pencil, mark the position of the mounting slots.

Use this sheet of paper as a wall mounting template.

3.Place this template on the wall in the position the Gateway will be mounted.

It is recommended to mount the Gateway with the cable connections on the bottom.

4.Mark the mounting holes.

If mounting on wood, drill holes for the supplied screws.

If mounting on sheetrock, drill holes to accept the supplied sheetrock anchors.

5.Leave screws extended about 0.15 inches from the wall.

6.Hang the Gateway on the screws.

15