Motorola 3.1 Alert Window, Figure, Description, Alert Window, Alert Parameter

Mesh Enabled Architecture Geo-Location Reference Guide

Alert Window

The Alert Window displays certain events that may occur while the system is operating. These events are summarized by Event Time, MAC Address, Name, and the Status.

You can choose to either enable or disable display this window by selecting the Alert Window option under the Window menu.

	Figure 9.	Alert Window
Alert Parameter	Description
Event Time	The date and time stamp for when the event that triggered the
	alert was captured.
MAC Address	The MAC address for the device being monitored.
Name	The name of the network node being monitored. The name
	displayed here will vary depending on the display attributes
	selected. The default display parameter is the MAC address
	formatted to remove hyphenation.
Status	The current status of the sensor device. One of the following
	Alert Status messages will be displayed:

New Sensor Detected – Additional configuration parameters have been applied and a sensor has been detected and added to the network configuration. The device name will migrate from the Unconfigured Sensors folder to the appropriate network configuration folder in the Sensor ID Window.

Sensor is On-Line– A sensor device that is currently configured in the network is on-line.

Sensor is Off-Line– A sensor device that is currently configured in the network is off-line.

Sensor is Dead – Communications cannot be established with a sensor device that is currently configured in the network.

7