Motorola 6803578F33 manual Pairing your headset, Test and use, Ensure headset is in pairing mode

English

Pairing your headset

Your phone’s Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. Please check your phone’s user’s guide.

Note : The Bluetooth feature remains on until you turn the feature off.

Before you can use your headset, you must pair (link) it with your phone.

1 Ensure headset is in pairing mode

Open the headset boom to power on the headset and initiate pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.

If the headset does not enter into pairing mode, see “Troubleshooting” section.

2 Set your phone to look for your headset

UÊ *iÀvœÀ“Ê >Ê `iۈViÊ `ˆÃVœÛiÀÞÊ vÀœ“Ê ̅iÊ «…œ˜i°Ê œÀÊ `iÌ>ˆÃÊ >LœÕÌÊ `iۈViÊ discovery, consult your phone’s user’s guide. The phone lists Bluetooth devices it finds.

UÊ Ê-iiVÌÊ Motorola H15 in the list of discovered devices and confirm by following the on-screen prompts.

UÊ 7…i˜Ê«Àœ“«Ìi`ÊLÞÊ̅iÊ«…œ˜i]Êi˜ÌiÀÊ̅iÊ«>ÃÎiÞÊ0000 and confirm.

Pairing is successful when the headset indicator flashes purple and blue.

Test and use

Your phone and headset are now paired and ready to make and receive calls. To confirm they are successfully paired and operating properly, place the headset over your ear and make a call from your phone. You will hear ringing from the headset.

After you have successfully paired your phone and headset, you do not need to repeat these steps each time you use the headset.

To conserve power, close the boom to turn your headset off. Re-open the boom to make a call.

7